{ -
On
5:10 AM
- 0
}
We are a fast growing Consultant Company, currently is seeking for qualified individuals, to fill in following position:
Subsea Operations Engineer
(Across Indonesia)
Subsea Operations Engineer
(
Requirements:
* Education:
o Technical College Degree inengineering
* Experience:
o Have a minimum of 15 years upstream oil & gas experience preferably with an operator
o Have at least 10 years subsea operations experience
o Have worked offshore on a production facility operating subsea wells
o Have a through working knowledge of the procedures used to operate a subsea facility
o Have a through understanding of subsea system components and layouts
o Have a good working knowledge of applicable AP and industry standards
o Is able to to prepare general philosophy-type documents
o Experienced in working in the multinational organizations
o Experienced in working in informational Oil Companies
* Basic Job Requirements:
o Review all necessary Pre-FEED documents and studies available at Oil Company related to development of the subsea facilities
o Prepare the Subsea Operations Philosophy for the subsea facilities. The philosophy to include, but not be limited to:
+ Well Operations
+ Flowline Operations
+ Flaring
+ Blow-down
+ Subsea Metering
+ Chemical Injection
+ Well Testing
+ Flow Assurance
+ Interfacing the Subsea Master Control System (MCS) with the topsides Process Control System
+ Hydraulic Power Unit (HPU) requirement to be included in FEED documents
+ Data Collection - pressure, temperature, etc
+ Reporting
+ Emergency shut-down (ESD)
+ System testing requirements-SCSSVs ESD, etc
o Prepare a list of subsea operating requirements to be included in Feed documents
o Assist theSubsea Commissioning Engineer prepare a process for hand-over from Commissioning to Operations
o Prepare a description of the training required for the Subsea Operation on board the FLNG
Inlet Process Facility Engineer - TDRINPEX2
(Across Indonesia)
Requirements:
* Education :
o Technical College Degree in Engineering
* Experience :
o Shall hold a recognized relevant degree or equivalent qualification
o Have at least 15 years of oil and gas engineering experience and 8 years in offshore engineering experience
o Be competent to design process configuration and optimization offshore inlet facility
o Be competent t calculate depressurizing for breakdown valve sizing
o Be competent of three phase separator sizing
o Be competent of equipment sizing such as separator, control and choke valves, etc
o Be competent of radiation and diversion simulations performed using Flaresin
o Be competent of preparation of design basic and philosophy documents such as safeguarding, shutdown, relief & blowdown, isolation & maintenance at offshore gas inlet facility
o Be familiar with relevant international standards and codes
o In addition the incumbent shall have a sound appreciation and knowledge of
o HSE aspects of oil and gas design
o Safely aspects of design in relation to the project cycle e.g. HAZOP, HAZID and Risk Analysis technique
o Experienced in working in the multinational organizations
o Experienced in working in International Oil Companies
* Basic Job Requirement :
o Review all necessary Pre-FEED documents and studies available at the Company related to inlet facilities
o Develop operating philosophy of inlet facility
o Define inlet facility's roles and responsibilities
o Design inlet facility configurations
o Size inlet facility equipments
o Evaluate the operability of inlet facilities
o Prepare a list of inlet facility related design requirement to be included in FEED document
o Status reporting
o Responsible to Head of Production Operations for delivery of the recommended design and its related documentation
o Will stay in Company's Jakarta Office until the completes design recommendation
Subsea Commissioning Engineer
(Across Indonesia)
Requirements:
* Education :
o Technical College Degree in Engineering
* Experience :
o Have a minimum of 15 years upstream oil & gas experience
o Have at least 10 years experience commissioning subsea equipment
o Have experience preparing subsea commissioning procedures
o Have a through understanding of subsea system components and layouts
o Have a good working knowledge of applicable API and industry standards
o Able to prepare general philosophy-type documents
o Experienced in working in the multinational organizations
o Experience in working in international Oil Companies
* Basic Job Requirements :
o Review all necessary Pre-FEED documents and studies available at the Company related to development of the subsea facilities
o Prepare the Subsea Commissioning Philosophy for the subsea facilities. The philosophy to include but not limited to commissioning of:
+ Flowlines, risets, PLET
+ Subsea manifolds and jumpers including well jumpers and flowline jumpers
+ Subsea umbilical (hydraulic chemical tubes and electrical cores)
+ Subsea treas including all down-hole gauges and tree mounted semsors
+ Subsea control system including:
# Subsea Control Module (SCM)
# Master Control Station (MCS)
# Topside to subsea power and communication systems
# Topsides hydraulic power unit (HPU)
+ Subsea Isolation valves (SSIVS)
+ Emergency Shut down System (ESD)
+ Chemical/MEG injection system from topside equipment to umbilical interface
o Prepare a list of commissioning related design requirements to be included in FEED documents
o In consultation with the Subsea Operations Engineer prepare an outline of the process for hand-over from Commissioning to Operations
o Interface with the HSE Department to ensure commissioning activities will adhere to project HSE requirements
o Recommended resources required to complete commissioning activities
o Determine logistic base support requirement for subsea commissioning activities
Subsea Integrity Management Engineer
(Across Indonesia)
Requirements:
* Education:
o Technical College Degree in engineering
* Experience:
o Have a minimum of 15 years upstream oil & gas experience preferably with an operator
o Have at least 5 years subsea operations experience
o Have a good understanding of subsea system components and layouts
o Have experience in subsea inspection and maintenance activities techniques
o Understands the concept of integrity Management and its objectives
o Have a good working knowledge of applicable API and industry standards
o Is able to to prepare general philosophy-type documents
o Experienced in working in the multinational organizations
o Experienced in working in informational Oil Companies
* Basic Job Requirements:
o Review all necessary Pre-FEED documents and studies available at the Company related to development of the subsea facilities
o Develop the Subsea integrity Management Philosophy for the subsea facilities. The Philosophy to include, but not be limited to:
+ Clear definition of the Integrity Management process, why it is being implemented, how it will be implemented and how it will be maintained throught the life of the project
+ Define which subsea components should be onside red Safety Critical Equipment (SCE)
+ Define the subsea equipment monitoring philosophy and the data to be collected-monitoring of flowlines,, erotion, corrosion, san production, etc
+ Define the integrity Management key performance Indicators (KPIs)
+ Define the subsea inspection, maintenance & repair (IMR) activities-what, when and how
+ Define the methods to be employed for subsea inspection, repair and replacement of subsea components
+ Define reporting and records management requirements
+ Define subdiling requirements
+ Define method for capturing and distributing lessons
+ Determine logistics base support requirements for Subsea IMR
+ Prepare list of options for implementing an IMR data base
+ Develop a subsea spare part philosophy
+ Prepare a list of subsea integrity management requirements to be included in FEED documents
+ Interface with the HSE Departments to ensure compliance with Project HSE requirements
FPSO Operation Engineer
(Across Indonesia)
Requirements:
* Education:
o Hold a recognized relevant degree or equivalent qualification
* Experience:
o Minimum of 10 years experience in FPSO operation
o Have a experience worked as Production Superintendent or Production Supervisor or equivalent position in FPSO project
o Have a throught knowledge about natural gas processing and process optimization for FPSO facility
o Have a through knowledge for plan start up / shutdown operation
o Be familiar with general philosophy type documents
o Be familiar with relevant international standards and codes
o Having the flexible mind and sparing no effort to Implement the jobs
* Basic Jobs Requirements
o To review all necessary documents and studies available at the Company related to development the operation of gas processing and liquefaction facilities
o To study and suggest process design modification for safe and reliable operation
o To prepare and develop the operation philosophy and requirement for FLNG facilities from the light of FPSO operator. The philosophy / requirement to include, but not limited to:
+ Process / Utility plan operation
# safety operation
# Process design consideration
# Equipment an material selection
# Control an monitoring
# Flaring an blow-own
# sparing philosophy
# Operating an shutdown criteria
# star up, shut own operation
# Operation organization, manning an training
+ Layout requirement
# status reporting
Hydrate Management Engineer
(Across Indonesia)
Requirements:
* Education :
o Technical College Degree in Engineering
* Experience :
o Shall hold a recognized relevant degree or equivalent qualification
o Have at least 15 years of oil and gas engineering experience and 8 years in offshore gas production operations
o Be competent of actual offshore gas production in terms of hydrate managements
o Be competent of actual offshore pipeline depressurization blowdown operations as one of the hydrate managements
o Be competent to write up procedures of offshore pipeline depressurization blowdown operations for hydrate management
o Be competent of actual offshore operations regarding continuous injection of thermodynamic hydrate inhibition such as MEG
o Be competent of preparation of design basis and philosophy documents for hydrate managements
o Be competent of actual offshore operations in liquid handling managements such as slugs
o Be competent of preparation of design basis and philosophy documents for slug handling managements
o In addition, the incumbent shall have a sound appreciation and knowledge of
+ HSE aspects of oil and gas design
+ Safety aspect of design in relation to the project cycle e.g. HAZOP, HAZID and Risk Analysis technique
+ Experienced in working in the multinational organizations
+ Experienced in working in International Oil Companies
* Basic Job Requirement:
o Review all necessary Pre-FEED documents and studies available at the Company related to hydrate managements
o Develop the hydrate managements philosophy
o Develop the hydrate management strategy
o Develop the hydrate management procedures
o Evaluate the hydrate management operability
o Prepare a list of hydrate management related design requirement to be included in FEED documents
o Status reporting
o Responsible to Head of Production Operations for delivery of the recommended design and its related documentation
o Will stay in Company's Jakarta office until the complete design recommendation
FPSO Maintenance Engineer
(Across Indonesia)
Requirements:
* Education:
o Hold a recognized relevant degree or equivalent qualification
* Experience:
o Minimum of 10 years experience in FPSO operation
o Have a experience worked as Maintenance Superintendent or Mechanical Supervisor or equivalent position in FPSO project
o Have a through knowledge about natural gas processing
o Have a through knowledge for maintenance plan an strategy for FPSO facility
o Be familiar with general philosophy type documents
o Be familiar with relevant international standards and codes
o Having the flexible mind and sparing no effort to Implement the jobs
* Basic Jobs Requirements
o To review all necessary documents and studies available at the Company related to development of gas processing and liquefaction facilities
o To study and suggest process design modification for safe and certain maintenance
o To prepare and develop the maintenance philosophy and requirement for FLNG facilities from the light of Maintenance executioner. The philosophy / requirement to include, but not limited to:
+ Maintenance philosophy
# Maintenance objectives
# Inspection strategy and plan
# Major an campaign maintenance
# sparing philosophy
# spare parts management
# Maintenance organization, manning and training
+ Requirement for essay maintenance
+ Layout requirement
o status reporting
* Other:
o Have a good communication in speaking and writing English
o Bring your of certificates and latest ijazah
* Willing to be places across Indonesia
Please send your complete cv and latest photograph to:
admin_mps@indospec.co.id
VISIT:
www.gasoiljobs.co.cc
www.oilandgas-jobs.co.cc
www.oilgasjob-s.co.cc
www.oil-trading.co.cc
* Education:
o Technical College Degree in
* Experience:
o Have a minimum of 15 years upstream oil & gas experience preferably with an operator
o Have at least 10 years subsea operations experience
o Have worked offshore on a production facility operating subsea wells
o Have a through working knowledge of the procedures used to operate a subsea facility
o Have a through understanding of subsea system components and layouts
o Have a good working knowledge of applicable AP and industry standards
o Is able to to prepare general philosophy-type documents
o Experienced in working in the multinational organizations
o Experienced in working in informational Oil Companies
* Basic Job Requirements:
o Review all necessary Pre-FEED documents and studies available at Oil Company related to development of the subsea facilities
o Prepare the Subsea Operations Philosophy for the subsea facilities. The philosophy to include, but not be limited to:
+ Well Operations
+ Flowline Operations
+ Flaring
+ Blow-down
+ Subsea Metering
+ Chemical Injection
+ Well Testing
+ Flow Assurance
+ Interfacing the Subsea Master Control System (MCS) with the topsides Process Control System
+ Hydraulic Power Unit (HPU) requirement to be included in FEED documents
+ Data Collection - pressure, temperature, etc
+ Reporting
+ Emergency shut-down (ESD)
+ System testing requirements-SCSSVs ESD, etc
o Prepare a list of subsea operating requirements to be included in Feed documents
o Assist the
o Prepare a description of the training required for the Subsea Operation on board the FLNG
Inlet Process Facility Engineer - TDRINPEX2
(
Requirements:
* Education :
o Technical College Degree in Engineering
* Experience :
o Shall hold a recognized relevant degree or equivalent qualification
o Have at least 15 years of oil and gas engineering experience and 8 years in offshore engineering experience
o Be competent to design process configuration and optimization offshore inlet facility
o Be competent t calculate depressurizing for breakdown valve sizing
o Be competent of three phase separator sizing
o Be competent of equipment sizing such as separator, control and choke valves, etc
o Be competent of radiation and diversion simulations performed using Flaresin
o Be competent of preparation of design basic and philosophy documents such as safeguarding, shutdown, relief & blowdown, isolation & maintenance at offshore gas inlet facility
o Be familiar with relevant international standards and codes
o In addition the incumbent shall have a sound appreciation and knowledge of
o HSE aspects of oil and gas design
o Safely aspects of design in relation to the project cycle e.g. HAZOP, HAZID and Risk Analysis technique
o Experienced in working in the multinational organizations
o Experienced in working in International Oil Companies
* Basic Job Requirement :
o Review all necessary Pre-FEED documents and studies available at the Company related to inlet facilities
o Develop operating philosophy of inlet facility
o Define inlet facility's roles and responsibilities
o Design inlet facility configurations
o Size inlet facility equipments
o Evaluate the operability of inlet facilities
o Prepare a list of inlet facility related design requirement to be included in FEED document
o Status reporting
o Responsible to Head of Production Operations for delivery of the recommended design and its related documentation
o Will stay in Company's Jakarta Office until the completes design recommendation
Subsea Commissioning Engineer
(
Requirements:
* Education :
o Technical College Degree in Engineering
* Experience :
o Have a minimum of 15 years upstream oil & gas experience
o Have at least 10 years experience commissioning subsea equipment
o Have experience preparing subsea commissioning procedures
o Have a through understanding of subsea system components and layouts
o Have a good working knowledge of applicable API and industry standards
o Able to prepare general philosophy-type documents
o Experienced in working in the multinational organizations
o Experience in working in international Oil Companies
* Basic Job Requirements :
o Review all necessary Pre-FEED documents and studies available at the Company related to development of the subsea facilities
o Prepare the Subsea Commissioning Philosophy for the subsea facilities. The philosophy to include but not limited to commissioning of:
+ Flowlines, risets, PLET
+ Subsea manifolds and jumpers including well jumpers and flowline jumpers
+ Subsea umbilical (hydraulic chemical tubes and electrical cores)
+ Subsea treas including all down-hole gauges and tree mounted semsors
+ Subsea control system including:
# Subsea Control Module (SCM)
# Master Control Station (MCS)
# Topside to subsea power and communication systems
# Topsides hydraulic power unit (HPU)
+ Subsea Isolation valves (SSIVS)
+ Emergency Shut down System (ESD)
+ Chemical/MEG injection system from topside equipment to umbilical interface
o Prepare a list of commissioning related design requirements to be included in FEED documents
o In consultation with the Subsea Operations Engineer prepare an outline of the process for hand-over from Commissioning to Operations
o Interface with the HSE Department to ensure commissioning activities will adhere to project HSE requirements
o Recommended resources required to complete commissioning activities
o Determine logistic base support requirement for subsea commissioning activities
Subsea Integrity Management Engineer
(
Requirements:
* Education:
o Technical College Degree in engineering
* Experience:
o Have a minimum of 15 years upstream oil & gas experience preferably with an operator
o Have at least 5 years subsea operations experience
o Have a good understanding of subsea system components and layouts
o Have experience in subsea inspection and maintenance activities techniques
o Understands the concept of integrity Management and its objectives
o Have a good working knowledge of applicable API and industry standards
o Is able to to prepare general philosophy-type documents
o Experienced in working in the multinational organizations
o Experienced in working in informational Oil Companies
* Basic Job Requirements:
o Review all necessary Pre-FEED documents and studies available at the Company related to development of the subsea facilities
o Develop the Subsea integrity Management Philosophy for the subsea facilities. The Philosophy to include, but not be limited to:
+ Clear definition of the Integrity Management process, why it is being implemented, how it will be implemented and how it will be maintained throught the life of the project
+ Define which subsea components should be onside red Safety Critical Equipment (SCE)
+ Define the subsea equipment monitoring philosophy and the data to be collected-monitoring of flowlines,, erotion, corrosion, san production, etc
+ Define the integrity Management key performance Indicators (KPIs)
+ Define the subsea inspection, maintenance & repair (IMR) activities-what, when and how
+ Define the methods to be employed for subsea inspection, repair and replacement of subsea components
+ Define reporting and records management requirements
+ Define subdiling requirements
+ Define method for capturing and distributing lessons
+ Determine logistics base support requirements for Subsea IMR
+ Prepare list of options for implementing an IMR data base
+ Develop a subsea spare part philosophy
+ Prepare a list of subsea integrity management requirements to be included in FEED documents
+ Interface with the HSE Departments to ensure compliance with Project HSE requirements
FPSO Operation Engineer
(
Requirements:
* Education:
o Hold a recognized relevant degree or equivalent qualification
* Experience:
o Minimum of 10 years experience in FPSO operation
o Have a experience worked as Production Superintendent or Production Supervisor or equivalent position in FPSO project
o Have a throught knowledge about natural gas processing and process optimization for FPSO facility
o Have a through knowledge for plan start up / shutdown operation
o Be familiar with general philosophy type documents
o Be familiar with relevant international standards and codes
o Having the flexible mind and sparing no effort to Implement the jobs
* Basic Jobs Requirements
o To review all necessary documents and studies available at the Company related to development the operation of gas processing and liquefaction facilities
o To study and suggest process design modification for safe and reliable operation
o To prepare and develop the operation philosophy and requirement for FLNG facilities from the light of FPSO operator. The philosophy / requirement to include, but not limited to:
+ Process / Utility plan operation
# safety operation
# Process design consideration
# Equipment an material selection
# Control an monitoring
# Flaring an blow-own
# sparing philosophy
# Operating an shutdown criteria
# star up, shut own operation
# Operation organization, manning an training
+ Layout requirement
# status reporting
Hydrate Management Engineer
(
Requirements:
* Education :
o Technical College Degree in Engineering
* Experience :
o Shall hold a recognized relevant degree or equivalent qualification
o Have at least 15 years of oil and gas engineering experience and 8 years in offshore gas production operations
o Be competent of actual offshore gas production in terms of hydrate managements
o Be competent of actual offshore pipeline depressurization blowdown operations as one of the hydrate managements
o Be competent to write up procedures of offshore pipeline depressurization blowdown operations for hydrate management
o Be competent of actual offshore operations regarding continuous injection of thermodynamic hydrate inhibition such as MEG
o Be competent of preparation of design basis and philosophy documents for hydrate managements
o Be competent of actual offshore operations in liquid handling managements such as slugs
o Be competent of preparation of design basis and philosophy documents for slug handling managements
o In addition, the incumbent shall have a sound appreciation and knowledge of
+ HSE aspects of oil and gas design
+ Safety aspect of design in relation to the project cycle e.g. HAZOP, HAZID and Risk Analysis technique
+ Experienced in working in the multinational organizations
+ Experienced in working in International Oil Companies
* Basic Job Requirement:
o Review all necessary Pre-FEED documents and studies available at the Company related to hydrate managements
o Develop the hydrate managements philosophy
o Develop the hydrate management strategy
o Develop the hydrate management procedures
o Evaluate the hydrate management operability
o Prepare a list of hydrate management related design requirement to be included in FEED documents
o Status reporting
o Responsible to Head of Production Operations for delivery of the recommended design and its related documentation
o Will stay in Company's Jakarta office until the complete design recommendation
FPSO Maintenance Engineer
(
Requirements:
* Education:
o Hold a recognized relevant degree or equivalent qualification
* Experience:
o Minimum of 10 years experience in FPSO operation
o Have a experience worked as Maintenance Superintendent or Mechanical Supervisor or equivalent position in FPSO project
o Have a through knowledge about natural gas processing
o Have a through knowledge for maintenance plan an strategy for FPSO facility
o Be familiar with general philosophy type documents
o Be familiar with relevant international standards and codes
o Having the flexible mind and sparing no effort to Implement the jobs
* Basic Jobs Requirements
o To review all necessary documents and studies available at the Company related to development of gas processing and liquefaction facilities
o To study and suggest process design modification for safe and certain maintenance
o To prepare and develop the maintenance philosophy and requirement for FLNG facilities from the light of Maintenance executioner. The philosophy / requirement to include, but not limited to:
+ Maintenance philosophy
# Maintenance objectives
# Inspection strategy and plan
# Major an campaign maintenance
# sparing philosophy
# spare parts management
# Maintenance organization, manning and training
+ Requirement for essay maintenance
+ Layout requirement
o status reporting
* Other:
o Have a good communication in speaking and writing English
o Bring your of certificates and latest ijazah
* Willing to be places across Indonesia
Please send your complete cv and latest photograph to:
admin_mps@indospec.co.id
VISIT:
www.gasoiljobs.co.cc
www.oilandgas-jobs.co.cc
www.oilgasjob-s.co.cc
www.oil-trading.co.cc
About the Author
