{ -
On
5:46 AM
- 0
}
ENGINEERING JOBS
TECHNIP is a leading provider of Engineering, Technologies and Construction services for oil and gas, petrochemical and other industries;
In Asia-Pacific, Technip has been present for more than 20 years. As part of its expansion in Asia-Pacific, Technip established a subsidiary in Indonesia: PT. Technip Indonesia (PTTI), which services the Indonesian Oil and Gas, Petrochemical and General Industrial sectors. PTTI covers offshore and onshore field development, gas processing and liquefaction, refining and onshore pipelines. In non-oil sectors, PTTI covers fertilizers, chemicals, cement, life sciences, power generation and other growth market industries.
As part of our business expansion in Indonesia, we are seeking highly qualified professionals to fill in position listed below:
TECHNIP is a leading provider of Engineering, Technologies and Construction services for oil and gas, petrochemical and other industries;
In Asia-Pacific, Technip has been present for more than 20 years. As part of its expansion in Asia-Pacific, Technip established a subsidiary in Indonesia: PT. Technip Indonesia (PTTI), which services the Indonesian Oil and Gas, Petrochemical and General Industrial sectors. PTTI covers offshore and onshore field development, gas processing and liquefaction, refining and onshore pipelines. In non-oil sectors, PTTI covers fertilizers, chemicals, cement, life sciences, power generation and other growth market industries.
As part of our business expansion in Indonesia, we are seeking highly qualified professionals to fill in position listed below:
SENIOR PROCESS SAFETY ENGINEER
Requirements:
- Bachelor degree from State of University, Majoring in Chemical Engineering
- Minimum 7 years experience in process safety engineering design for offshore platform and onshore.
- Experience in preparing safety philosophy, hazardous area classification, escape route, safety and fire fighting design, firewater demand calculation, firewater design.
- Experience in consequence modeling and flare/vent dispersion and radiation study
- Familiar with NFPA, IP codes
- Experience in software such as Pipenet, PHAST, FRED, FlareSim
- Should possess good communication skills
ROTATING MECHANICAL ENGINEER
Requirements:
- Bachelor degree in Mechanical Engineering.
- Minimum 3 - 5 years of design experience in various Rotating Equipment including High Pressure Hydrocarbon Compressors and Turbo-Expanders
- Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients
- Familiar with the standards and codes such as API, ASME/ANSI , NFPA, NACE, EN and ISO
- Should be able to work effectively in a team, and maintain good quality of work.
STATIC MECHANICAL ENGINEER
Requirements:
- Bachelor degree in Mechanical Engineering.
- Possess at least minimum 3 - 5 years of design experience in various Static Equipment including Pressure Vessels, Air-coolers, Heat Exchangers, Fired-Heater, API-650 tanks for Onshore /Offshore application.
- Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients
- Familiar with the standards and codes such as ASME/ANSI, PD 5500, API-650/620, NACE, EN and ISO .
- Should be able to work effectively in a team, and maintain good quality of work.
PACKAGES MECHANICAL ENGINEER
Requirements:
- Bachelor degree in Mechanical Engineering.
- Possess at least minimum 3 - 5 years of design experience in Package Equipment for Onshore/Offshore application ie. Process Packages, Utility Packages, Material Handling equipment, and Water Treatment /WWT, and at least total of 5 years of experience in EPC Contracting work will be an advantage, including adequate Site and Test-Witness experience.
- Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients
- Familiar with the standards and codes such as API, ASME/ANSI, NFPA, NACE, EN and ISO .
- Should be able to work effectively in a team, and maintain good quality of work.
PROCESS DRAFTER
Requirements:
- Must possess minimum Diploma / Certificate in Engineering drafting from a recognized institution / Technical school in Indonesia.
- Minimum of 3 years experience in Offshore / Onshore Oil and Gas projects related drafting.
- Should be able to generate process drawings like Smart Plant P&IDs and safety drawings like safety equipment layout etc with good accuracy and speed.
- Should have sufficient knowledge about the drafting standards and AutoCAD library.
- Shall have good written and spoken English language communication skills.
- Should possess hands on experience in handling drafting softwares like AutoCAD, Microstation etc.
- Should be a fast learner and a team worker.
LEAD ENGINEER (BULK MATERIAL HANDLING SPECIALIST)
Job Requirements:
- Bachelor degree in Mechanical Engineering.
- Possess minimum 10 – 15 years experience in Mining Industry or Nickel plant detailed engineering design. Cement Plant design experience might also be considered.
- Experience to handle design in equipment selection for Bulk Material Handling such as Belt conveyors, conveyor drives, overland conveyor, Apron Feeder, tracking systems, tensioner system, in-line belt weighers, stacking and reclaiming equipment, barge loading systems, transfer towers, and weigh bins, coal preparation equipment like crushers and washeries. reporting and document control across a portfolio of brown – field revamp engineering design project
- Able to work independent and have ability to lead a team for Bulk Material Handling Equipment for mining project.
- Self initiate for producing engineering specification/requisition/perform equipment selection for client approval.
- Able to obtain cost estimation, perform Equipment vendor’s bids analysis and to attend clarification meeting
- Willing to be placed in Balikpapan, Kalimantan Selatan.
SENIOR ENGINEER (BULK MATERIAL HANDLING)
Job Requirements:
- Bachelor degree in Mechanical Engineering.
- Possess minimum 5 - 8 years experience in Mining Industry,
- Experience to handle design in equipment selection for Bulk Material Handling such as Belt conveyors, conveyor drives, overland conveyor, Apron Feeder, tracking systems, tensioner system, in-line belt weighers, stacking and reclaiming equipment, barge loading systems, transfer towers, and weigh bins, coal preparation equipment like crushers and washeries. reporting and document control across a portfolio of brown – field revamp engineering design project
- Experience in installation and commissioning is an advantage
- Should possess management skills.
- Should possess good communication skills.
- Should be able to work effectively in a team, and maintain good quality of work.
- Willing to be placed in Balikpapan, Kalimantan Selatan.
MATERIAL SELECTION SPECIALIST
- Bachelor Degree in Metallurgy
- Minimum experience 10 years in Corrosion Study / Material Selection / Inspection, of which at least 7 years in oil and gas at one projects as Lead and main consultant.
- The should be able to perform and execute independently the following as a minimum
Development of Material Selection Philosophy, which includes:
· Corrosion affecting factors
· Corrosion assessment methodology
· Basis of material selection
· Protection from external corrosion
· Protection for underground pipe and structure
· Protective coating and lining selection
· Corrosion study report including details about the methodology of Corrosion estimation (Corrosion model)
· Corrosion rate calculation using ECE or similar software
· Recommend internal corrosion monitoring requirement (corrosion probe, corrosion coupon etc.)
· Recommend corrosion mitigation measures such as injection of chemicals etc.. coordinate with various vendors to analyze exact requirement and suggest most optimal injection rates and points of injections.
· Recommend External corrosion monitoring requirement,
· Recommend on catholic protections and similar requirement
· Develop Material Selection Diagram
· Recommendation of most suitable MOC’s with respect to CO2 corrosion, H2S corrosion, Chloride stress corrosion, Hydrogen embitterment and HIC etc but not limited.
· Candidate should be well familiar with offshore and onshore , upstream and downstream corrosion study requirements.
· For brown field, suggest ways for Integrity studies with respect to thickness measurements, de-rating, modifications requirement or complete replacement of equipments.
· Candidate should be well familiar with Sea weather conditions for offshore projects and equatorial conditions for onshore projects in South East Asia.
· Candidate should be familiar with relevant Regulatory requirements in Indonesia, with respect to pipelines, above/underground/subsea and other subsea structures.
· Direct Risk based Life cycle cost analysis
· Advise on Corrosion related fatigue in risers and structures.
· Familiar with both hydrocarbon based and water based corrosion phenomenon including sea water/ brackish water/ oxygen enriched water, mud systems, produced water systems, de-sanding cyclones systems etc.
· Familiar with all weather protective coatings, linings, and paintings.
- Should be familiar with Software knowledge such as ECE , NORSOK’s s/w, OHIO, DNV’s, Orbit etc or similar
For interested applicants, please send your application to our website at www.technip.com
Requirements:
- Bachelor degree from State of University, Majoring in Chemical Engineering
- Minimum 7 years experience in process safety engineering design for offshore platform and onshore.
- Experience in preparing safety philosophy, hazardous area classification, escape route, safety and fire fighting design, firewater demand calculation, firewater design.
- Experience in consequence modeling and flare/vent dispersion and radiation study
- Familiar with NFPA, IP codes
- Experience in software such as Pipenet, PHAST, FRED, FlareSim
- Should possess good communication skills
ROTATING MECHANICAL ENGINEER
Requirements:
- Bachelor degree in Mechanical Engineering.
- Minimum 3 - 5 years of design experience in various Rotating Equipment including High Pressure Hydrocarbon Compressors and Turbo-Expanders
- Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients
- Familiar with the standards and codes such as API, ASME/ANSI , NFPA, NACE, EN and ISO
- Should be able to work effectively in a team, and maintain good quality of work.
STATIC MECHANICAL ENGINEER
Requirements:
- Bachelor degree in Mechanical Engineering.
- Possess at least minimum 3 - 5 years of design experience in various Static Equipment including Pressure Vessels, Air-coolers, Heat Exchangers, Fired-Heater, API-650 tanks for Onshore /Offshore application.
- Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients
- Familiar with the standards and codes such as ASME/ANSI, PD 5500, API-650/620, NACE, EN and ISO .
- Should be able to work effectively in a team, and maintain good quality of work.
PACKAGES MECHANICAL ENGINEER
Requirements:
- Bachelor degree in Mechanical Engineering.
- Possess at least minimum 3 - 5 years of design experience in Package Equipment for Onshore/Offshore application ie. Process Packages, Utility Packages, Material Handling equipment, and Water Treatment /WWT, and at least total of 5 years of experience in EPC Contracting work will be an advantage, including adequate Site and Test-Witness experience.
- Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients
- Familiar with the standards and codes such as API, ASME/ANSI, NFPA, NACE, EN and ISO .
- Should be able to work effectively in a team, and maintain good quality of work.
PROCESS DRAFTER
Requirements:
- Must possess minimum Diploma / Certificate in Engineering drafting from a recognized institution / Technical school in Indonesia.
- Minimum of 3 years experience in Offshore / Onshore Oil and Gas projects related drafting.
- Should be able to generate process drawings like Smart Plant P&IDs and safety drawings like safety equipment layout etc with good accuracy and speed.
- Should have sufficient knowledge about the drafting standards and AutoCAD library.
- Shall have good written and spoken English language communication skills.
- Should possess hands on experience in handling drafting softwares like AutoCAD, Microstation etc.
- Should be a fast learner and a team worker.
LEAD ENGINEER (BULK MATERIAL HANDLING SPECIALIST)
Job Requirements:
- Bachelor degree in Mechanical Engineering.
- Possess minimum 10 – 15 years experience in Mining Industry or Nickel plant detailed engineering design. Cement Plant design experience might also be considered.
- Experience to handle design in equipment selection for Bulk Material Handling such as Belt conveyors, conveyor drives, overland conveyor, Apron Feeder, tracking systems, tensioner system, in-line belt weighers, stacking and reclaiming equipment, barge loading systems, transfer towers, and weigh bins, coal preparation equipment like crushers and washeries. reporting and document control across a portfolio of brown – field revamp engineering design project
- Able to work independent and have ability to lead a team for Bulk Material Handling Equipment for mining project.
- Self initiate for producing engineering specification/requisition/perform equipment selection for client approval.
- Able to obtain cost estimation, perform Equipment vendor’s bids analysis and to attend clarification meeting
- Willing to be placed in Balikpapan, Kalimantan Selatan.
SENIOR ENGINEER (BULK MATERIAL HANDLING)
Job Requirements:
- Bachelor degree in Mechanical Engineering.
- Possess minimum 5 - 8 years experience in Mining Industry,
- Experience to handle design in equipment selection for Bulk Material Handling such as Belt conveyors, conveyor drives, overland conveyor, Apron Feeder, tracking systems, tensioner system, in-line belt weighers, stacking and reclaiming equipment, barge loading systems, transfer towers, and weigh bins, coal preparation equipment like crushers and washeries. reporting and document control across a portfolio of brown – field revamp engineering design project
- Experience in installation and commissioning is an advantage
- Should possess management skills.
- Should possess good communication skills.
- Should be able to work effectively in a team, and maintain good quality of work.
- Willing to be placed in Balikpapan, Kalimantan Selatan.
MATERIAL SELECTION SPECIALIST
- Bachelor Degree in Metallurgy
- Minimum experience 10 years in Corrosion Study / Material Selection / Inspection, of which at least 7 years in oil and gas at one projects as Lead and main consultant.
- The should be able to perform and execute independently the following as a minimum
Development of Material Selection Philosophy, which includes:
· Corrosion affecting factors
· Corrosion assessment methodology
· Basis of material selection
· Protection from external corrosion
· Protection for underground pipe and structure
· Protective coating and lining selection
· Corrosion study report including details about the methodology of Corrosion estimation (Corrosion model)
· Corrosion rate calculation using ECE or similar software
· Recommend internal corrosion monitoring requirement (corrosion probe, corrosion coupon etc.)
· Recommend corrosion mitigation measures such as injection of chemicals etc.. coordinate with various vendors to analyze exact requirement and suggest most optimal injection rates and points of injections.
· Recommend External corrosion monitoring requirement,
· Recommend on catholic protections and similar requirement
· Develop Material Selection Diagram
· Recommendation of most suitable MOC’s with respect to CO2 corrosion, H2S corrosion, Chloride stress corrosion, Hydrogen embitterment and HIC etc but not limited.
· Candidate should be well familiar with offshore and onshore , upstream and downstream corrosion study requirements.
· For brown field, suggest ways for Integrity studies with respect to thickness measurements, de-rating, modifications requirement or complete replacement of equipments.
· Candidate should be well familiar with Sea weather conditions for offshore projects and equatorial conditions for onshore projects in South East Asia.
· Candidate should be familiar with relevant Regulatory requirements in Indonesia, with respect to pipelines, above/underground/subsea and other subsea structures.
· Direct Risk based Life cycle cost analysis
· Advise on Corrosion related fatigue in risers and structures.
· Familiar with both hydrocarbon based and water based corrosion phenomenon including sea water/ brackish water/ oxygen enriched water, mud systems, produced water systems, de-sanding cyclones systems etc.
· Familiar with all weather protective coatings, linings, and paintings.
- Should be familiar with Software knowledge such as ECE , NORSOK’s s/w, OHIO, DNV’s, Orbit etc or similar
For interested applicants, please send your application to our website at www.technip.com
About the Author
