{ -
On
5:58 AM
- 0
}
ENGINEERING JOBS
• perform inspection of plant equipment and offshore facility during normal operation and shutdowns in compliance with Company's inspection policy, recommended practices (RP) and the guideline of API Codes and Standards
• Review the results of non-destructive testing on piping and equipment.
• Review the results of hardness tests, ID/OD measurements using callipers.
• Review the result of NDT inspection of tubes.
• Witness hydro and pneumatic tests.
• Witness setting of PSV, if assigned by Company.
• Prepare inspection reports with recommendations for approval of Company.
Inspection Engineer
Candidate should be BE / B Tech with at least 5 years experience in Oil & Gas
• Inspect equipment, piping and structures (internally and externally) such as heaters, pressure vessels, fin-fan coolers, boilers, heat exchangers, storage tanks etc. for corrosion and deterioration and assesses the integrity of the equipment.
• Analyze the condition observed and recommend appropriate repair/remedialaction as necessary.
• Prepare inspection work lists for necessary repairs/works for the inspected equipment based on its condition.
• Prepare inspection reports which should include details of all observations (as opened and after cleaning), repairs carried out and recommendations for future corrective/remedial actions. Inspection work lists and inspection reports should be to high professional engineering level.
• Check the condition of safety relief valves, prescribe repairs as required, and witness pressure setting of safety valves.
• Check QA/QC of repairs, capital projects, BMRE works etc for compliance with Company ITP, referred standards and codes.
• Witness hydrostatic and pneumatic tests of equipment and piping.
• Determine appropriate painting/coating scheme for pipelines, structures, equipment and tanks and give recommendations to Company about selection of systems and procedures for quality control.
• Occasionally inspect paint condition and conduct quality control checks for painting jobs.
• Supervise assigned inspectors.
• Develop welding procedures specifications and qualifications thereof.Conduct tests to qualify welders in compliance with ASME Sec. IX.
• Interpret radiographic films and other NDE data and initiate required reports and certificates.
• Carry out any similar or related jobs as directed by supervisor.
Candidates currently available in India can send their updated CV in word format along with current location & current salary details to epcengg@gmail.com
We are looking for candidates in following categories for 5 week shutdown project in Qatar starting December 2011.
Plant Inspector
Candidate shall have at least five (5) years of current work experience and any two of API 510/570/653
Certification.
He should be conversant with ASME Sec.V, ASME SECVIII, ASME B 31.3 Codes and applicable API
Codes.
Skilled in use of CIMS and MS-Office software and must demonstrate good communication skill in English
Plant Inspector
Candidate shall have at least five (5) years of current work experience and any two of API 510/570/653
Certification.
He should be conversant with ASME Sec.V, ASME SECVIII, ASME B 31.3 Codes and applicable API
Codes.
Skilled in use of CIMS and MS-Office software and must demonstrate good communication skill in English
• perform inspection of plant equipment and offshore facility during normal operation and shutdowns in compliance with Company's inspection policy, recommended practices (RP) and the guideline of API Codes and Standards
• Review the results of non-destructive testing on piping and equipment.
• Review the results of hardness tests, ID/OD measurements using callipers.
• Review the result of NDT inspection of tubes.
• Witness hydro and pneumatic tests.
• Witness setting of PSV, if assigned by Company.
• Prepare inspection reports with recommendations for approval of Company.
Inspection Engineer
Candidate should be BE / B Tech with at least 5 years experience in Oil & Gas
• Inspect equipment, piping and structures (internally and externally) such as heaters, pressure vessels, fin-fan coolers, boilers, heat exchangers, storage tanks etc. for corrosion and deterioration and assesses the integrity of the equipment.
• Analyze the condition observed and recommend appropriate repair/remedialaction as necessary.
• Prepare inspection work lists for necessary repairs/works for the inspected equipment based on its condition.
• Prepare inspection reports which should include details of all observations (as opened and after cleaning), repairs carried out and recommendations for future corrective/remedial actions. Inspection work lists and inspection reports should be to high professional engineering level.
• Check the condition of safety relief valves, prescribe repairs as required, and witness pressure setting of safety valves.
• Check QA/QC of repairs, capital projects, BMRE works etc for compliance with Company ITP, referred standards and codes.
• Witness hydrostatic and pneumatic tests of equipment and piping.
• Determine appropriate painting/coating scheme for pipelines, structures, equipment and tanks and give recommendations to Company about selection of systems and procedures for quality control.
• Occasionally inspect paint condition and conduct quality control checks for painting jobs.
• Supervise assigned inspectors.
• Develop welding procedures specifications and qualifications thereof.Conduct tests to qualify welders in compliance with ASME Sec. IX.
• Interpret radiographic films and other NDE data and initiate required reports and certificates.
• Carry out any similar or related jobs as directed by supervisor.
Candidates currently available in India can send their updated CV in word format along with current location & current salary details to epcengg@gmail.com
About the Author
