PT. SUPRACO INDONESIA
Jakarta based company with more than 32 years of experience in providing
services to oil and gas industry and Geothermal in Indonesia. We are
seeking for best candidates to fill the vacant position for our project
at CEPU BLOCK.
1. Site Material Coordinator Field Facilities (CP-A71)
Responsibility and duties:
•Site infrastructure/logistics in host country:
1. Receiving, warehousing and issuance of material
2. Sequencing of Spare Parts – Commissioning and 2 year Operating
3. Work jointly with Construction to oversee materials requirements at site
• Materials management:
1. Administration and supervision of the Contractor’s Materials Management Plan and Warehousing Plan
2. Manage distribution of the materials and equipment as required
3. Project material and equipment delivery at site - interface with the Jakarta home office team
4. Apply project specifications for equipment and material preservation, packing and handling
5.Oversee Contractor’s material tracking “in transit” through receipt at job site
6. Confirm custom clearance dates and inland transportation plan dates
7.Monitor Contractor’s Long Lead Equipment and Spare Parts Transportation Plan
8. Interface with the Construction team at site on all materials / equipment issues
Required knowledge, qualifications, skills, and experiences:
• 5 years of Materials Management (at site) and Logistics experience with a project of similar size and scale
•Intermediate to Expert Equipment and Materials Logistics Skills including Contracts, Customs, Traffic, and Expediting
• Strong analytical, leadership, negotiation and communication skills
• Hands on experience with computerized materials management and tracking system
•College / University Education or equivalent
•Must be a self-starter and able to work in a virtual organization
•
Good interpersonal and communication skills in English and Bahasa
Indonesia. The ability to speak Javanese is an additionally desirable
attribute.
• Ability to oversee and monitor EPC Contractor
logistics activities including track/monitor key equipment and material
movements
2. E&I Inspector – Field Facilities (CP-A72)
RESPONSIBILITY AND DUTIES:
•Oversee and monitor inspection of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
•Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
• Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
•
Jointly develop E&I inspection check lists or review the check
lists generated by the Contractor for compliance to project requirements
•
Witness instrument calibration at contractor facilities and / or in the
field for permanent project materials and temporary test instruments /
equipments used in E&I construction works
• Co-ordinate with Contractor and construction on cable tray routing and installation inspection
•
Ensure cable pulling and termination using proper crimping tools are
done as per approved cable schedules and project specifications. Check
cable ID markers for traceability.
• Witness installation inspection of E&I control panels (both local and inside the control rooms)
•Monitor and witness continuity and meggering inspection works for cables
•Monitor cable laying works in trenches, through ducts and on cable trays
• Witness loop checks and review records for the same
•Inspect installation and testing of instrument tubing works
•
Review Contractor’s field inspection and test reports and ensure that
inspections are carried out as per approved ITP requirements
• Assist and co-ordinate with other disciplines on electrical motors installation and alignments
• Interface, participate or co-ordinate in E&I pre-commissioning activities as required
• Preparation of punch lists
•
Verify Contractor / Subcontractor Quality management systems, plans,
procedures, and processes are in place. Implement Cepu project
Construction Surveillance Program.
• Periodically audit the Contractor’s inspection data base for correctness and updating.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
•
Minimum ten (10) years experience in inspection of E&I works on
major onshore construction projects out of which at least 3 years
experience as senior QC E&I inspector
• Experienced in witnessing
SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of
Electrical & Instrument control systems
• Exposure to DCS instrumentation works and commissioning of the same
•Experienced in conducting field QA audits on E&I works
•Thorough knowledge on International standards on E&I like IEC etc.
• Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
• Demonstrated ability to communicate in multiple languages
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base.
3. Machinery inspector Field Facilities (CP-A73)
RESPONSIBILITY AND DUTIES:
• Oversee receiving and
installation inspection of rotating / static equipments conducted at
contractors, sub-contractors facilities and field
• Coordinate with other structural / civil disciplines for foundations checking / leveling before installation
•Witness
/ participate in equipment leveling / alignment (mill wright) works
which includes both hot and cold alignments. Review and sign-off the
same. Verify fabrication fit-up, alignment, and dimensional tolerances.
• Witness / participate in mechanical equipment receiving inspection works upon receipt at site
•
Monitor the implementation of contractor’s mechanical equipment
preservation program and report any quality issues to the site
verification lead
•Conduct equipment internals inspection and participate in equipment close out / box up inspections
• Generate punch lists and co-ordinate with contractor for follow up and close out of the same
•Review original material certificates for compliance to codes and specifications where required
• Ensure testing, measuring, welding, and NDE equipment are fully calibrated and has current certification
• Monitor the use of welding consumables is per manufacturer’s recommendations and full certification
• Review Contractor’s field inspection and test reports
• Review welder qualifications certifications, and attend welder qualification
•
Verify Contractor, Subcontractor Quality management systems, plans,
procedures, and processes are in place. Issue NCR where
non-conformances are noted and maintenance of the data base.
•Implement EPC1 Field Facilities Construction Surveillance Program
• Assist MIGAS certification team towards SKPP / SKPI
• Where required, provide inspection assistance to equipment painting and insulation works
• Co-ordinate with HSE plus rigging team to ensure safe lifting and positioning of equipments
• Monitor bolt torque tighteneing works where applicable and review the records
•Witness valve testing at shop / site and safety relief valve pop up tests where required
• Witness load tests for project permanent cranes when required
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
•
Minimum fifteen (15) years experience in inspection of machinery (both
rotating and static equipments) on major onshore construction projects
• Knowledgeable on international standards like ANSI, API, ASME etc. on equipment installation and inspection
•
Exposure to fabrication / installation inspection of skid mounted
package equipments, stand alone static / rotating equipments like pumps,
compressors, diesel generators, vessels etc. in onshore oil and gas
projects.
• Experienced in hot and cold alignment works of rotating
equipments. Knowledge on use of specialized tools for alignment / leveling purposes.
• Experienced in equipment internal inspection works, hydrotests / leak tests etc.
• Able to read GA drawings and equipment installation drawings. Also
read P&ID and isometric drawings for interfacing activities.
•
Exposure to safe rigging and lifting practices for safe lifting and
installation of equipments / skids. Able to understand and then
co-ordinate with HSE / Rigging teams for safe installation practices.
• Working knowledge on painting and insulation works
• Knowledge on bolt torque tightening works
• Exposure to SKPI requirements for equipment installation certification
• Familiar with MIGAS regulations for cranes load testing
• Experienced in shop / field valve testing works as per API, ANSI / ASME persyaratan
• Experienced in witnessing safety relief valve pop–up testing
• Experienced in installation inspection of heat tracing piping / tubing works
• Exposure to work permits system (e.g. hot work, confined space etc.) and implementation of safe work practices
• Good oral and written English language skills. Demonstrated ability to communicate in multiple languages.
• Well versed in safe work practices
4. Domestic Content Coordinator (CP-A74)
RESPONSIBILITY AND DUTIES:
• Follow, analyze and distribute as necessary the Domestic Content Surveyor reports
• Assist Project Teams as an expert in APDN and Domestic content calculation
• Provide guidance in how to improve Domestic Content realization
• Support project teams in case of Contractors / subcontractors / vendors claims relating to Domestic Content
• Interface with BPMIGAS as needed by the Project. Be the main contact of BPMIGAS TKDN division
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• College Degree
• Experience working in procurement and/or in a Domestic Content survey
• Strong knowledge of PTK 007 and TKDN requirements
5. Expediting/ Logistic Coordinator - Field Facilities (CP-A75)
RESPONSIBILITY AND DUTIES:
• MATERIALS MANAGEMENT:
• Administration and supervision of the Contractor’s Materials Management Plan and Warehousing Plan
• Manage distribution of the materials and equipment as required
•Project material and equipment delivery at site
• Apply project specifications for equipment and material preservation, packing and handling
• Oversee Contractor’s material tracking “in transit” through receipt at job site
• Confirm custom clearance dates and inland transportation plan dates
• Monitor and supervise Contractor’s piping bulk material procurement/ expediting including logistics
• Interface with the Construction team at site on all materials / equipment issues
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
•5 years of Materials Management and Logistics experience with a project of similar size and scale
• Intermediate to Expert Equipment and Materials Logistics Skills including Contracts, Customs, Traffic, and Expediting
• Strong analytical, leadership, negotiation and communication skills
• Hands on experience with computerized materials management and tracking system
•College / University Education or equivalent
• Must be a self-starter and able to work in a virtual organization
•
Good interpersonal and communication skills in English and Bahasa
Indonesia. The ability to speak Javanese is an additionally desirable
attribute.
• Ability to oversee and monitor EPC Contractor
logistics activities including track/monitor key equipment and material
movements
6. Environment, Regulatory & Socioeconomic Advisor (CP-A76)
RESPONSIBILITY AND DUTIES:
1. Coordinate ongoing effort to
obtain various permits for EPC3&4 scope of work in a timely fashion
in order to remain in compliance with National, Province, and Local
regulations.
2.Interface with the functional groups as necessary to
access timely support for project activities, identify/implement best
practices and lessons learned
3.Work with PMT and Functional groups
to support development of documents such as oil spill response plan and
waste management plan.
4.Interface with project engineering and construction to ensure environmental and regulatory compliance.
5.
Coordinate development and submittal of EMCAPS regulatory compliance
and environmental management plans for project facilities
6. Work
with consultants, as necessary, to prepare and submit requisite
environmental, regulatory and socioeconomic impact assessments.
7.
Interface and coordinate activities with functional groups, as
appropriate, to develop and implement appropriate plans for interfacing
with Non-Governmental Organisations(NGO’s) and Government agencies.
8. Review and advise PMT about EPC contractor’s environmental,
regulatory and socioeconomic documents and deliverables, as prescribed
in project Coordination Procedure.
9. Prepare project internal
environmental, regulatory and socioeconomic stewardship reports, as well
as external reports required to satisfy Government or external
financial institution conditions/requests.
10. Assist project team,
as appropriate, on special tasks and studies related to overall
Environmental and Regulatory permitting requirements, and community
affairs at shore tie-in and offshore work sites.
11. Develop
amicable relationships to facilitate open communication and transparency
in processes and procedures with various Government offices (BPMIGAS,
SeaCom, etc) that are responsible for issuing recommendations and
approvals for regulatory and environmental permits.
12. Work closely with ITS to exploit full benefits of the work scope for which ITS has been contracted.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
•
Broad project management, technical and SH&E skills with good
understanding of working in a project setting and an ability to interact
amicably with various external stakeholders
• 5+ years broad-based
experience preferred, with prior experience in one or more related
disciplines (i.e. Environmental, Regulatory and Socioeconomic)
• Knowledge of EMCAPS process, and in particular SH&E deliverable requirements
•Knowledge of EMDC strategies and key business drivers
•
Good interpersonal and communication skills in English and Bahasa
Indonesia. Ability to speak Jawanese is an additionally desirable
attribute.
• Adaptable to changing priorities as focus of activity is expected to vary between the three disciplines.
• Willingness to undertake business travel and/or field based short term assignments
•
Ability to interact proactively in the Project’s interest, with EPC
contractor, local Government offices and local community in East Jawa
province.
7. Welding Inspector (CP-A77)
RESPONSIBILITY AND DUTIES:
• Assist reviewing WPS, WQT records and welding inspection related QC documents
•
Witness and oversee daily activities and related inspection activities
in piping, structural, mechanical, and E&I disciplines. This
includes visual and NDT checks like RT, MT, PT and UT.
• Witness / monitor NDT activities, and interpret / review NDT reports on RT, MT, PT and UT
• Monitor and inspect exotic material welding works (DSS, SDSS and CRA) inclusive of PMI and ferrite checks
•
Monitor in-process welding parameters like fit up, purging and purging
level (O2 checking), heat input and maintenance of inter-pass
temperature, passivation activities, flushing, etc.
• Monitor
welder performance continuously, set in motion the corrective actions
when the quality levels / trend is not in acceptable levels
• Monitor
welding consumable handling on site, and conduct daily spot checks in
the field to ensure proper handling of welding consumables. Review
original welding consumable material certificates for compliance to
codes and specifications where required.
• Monitor / surveillance of material traceability in weldments
• Witness / monitor weld repair activities and welding distortion correction activities
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Participate in line walk before hydro test, preparation of punch lists and follow up of the same for close out
• Witness piping hydrotest and flushing works, witness reinstatement checks for final acceptance
•Witness Nitrogen (N2) leak tests on piping systems
•Witness furnace PWHT and Local PWHT of piping works
•
Verify Contractor, Subcontractor Quality management systems, plans,
procedures, and processes are in place. Implement Project Construction
Surveillance Program
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
•
Have minimum of 15 years in welding inspection activities working to
international standards like ANSI B31.3 / API 650 / ASME Sec IX / Norsok
/ NACE RP 0175. Possess Minimum CSWIP 3.1 or AWS CWI welding inspector
qualifications.
• Possess ASNT NDT L-II in RT / MT / PT / UT and able to review radiographs to various international standards.
• Possess a proactive approach plus willingness to closely monitor and educate the exotic alloy welders
•
Experience in welding and inspection of exotic alloys like Duplex SS /
Super Duplex SS / Inconel 825 is mandatory and highly preferred
•
Knowledge on purging and maintenance of heat input / interpass
temperature required. Familiar with PMI (P-met) / Ferrite checking and
review of these reports for compliance.
• Experience in working on oil and gas projects involving sour oil service is preferred
• Able to read and understand P&IDs, isometrics and GA drawings, both engineering and shop drawings
•Able to review PWHT charts and conduct in process spot checking
• Able to review hydrotest packs, witness hydrotests and reinstatement works for system acceptance
• Experienced in Nitrogen leak tests preferred
• Thorough understanding of applicable industry specifications
•
Native tongue in Bahasa Indonesia with proficiency in spoken and
written English language skills for official works preferred. Familiar
with Microsoft Office suite of software programs, Lotus Notes, etc.
Well versed in safe work practices including co-ordination with contractors on ensuring radiation safety
8. SHE&S Safety Site (CP-A78)
RESPONSIBILITY AND DUTIES:
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
•Conduct
regular safety inspections / assessments on-site and at key off-site
subcontractor locations in accordance with established project and site
safety plans or as requested by site team members
• Identify and work
to eliminate hazards, unsafe conditions, and unsafe acts; work with
company, contractor, and subcontractor management toward achieving an
injury-free work place
• Keep site management apprised of significant
safety issues, safety alerts and plans / progress towards resolving
issues and eliminating hazards
• Advise site team of safety initiatives, issues, challenges, and incident investigations / follow-up
•
Communicate safety initiatives, achievements, experiences, and issues
from other sites and projects with site team members and contractor /
subcontractor safety advisors / management
• Participate in
investigation and follow-up of incidents / accidents; prepare
notifications / reports for communication of significant incidents to
company project / functional management per project incident reporting
procedures and matrix
• Coach and advise contractor / subcontractor
safety professionals / management in incident investigation
documentation, reporting, and follow-up, including root cause analysis
and case management
• Monitor work processes to ensure compliance with the site work permit system and area / system responsibilities
• Prepare / provide a safety induction briefing to new ExxonMobil (EM) team members and EM visitors to site
• Collect and share safety lessons learned with other sites and project and functional management
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• College level education or equivalent
• 5 - 7 years in Construction Safety-related positions
• Good computer skills including Lotus Notes, Microsoft Excel, Microsoft Word and Microsoft PowerPoint
9. Civil / Structural Inspector – Infrastructure Facilities (CP-A79)
RESPONSIBILITY AND DUTIES:
• Oversee inspection of structural activities conducted at contractors and sub-contractors facilities.
• Coordinate with other structural.
•Review original material certificates for compliance to codes and specifications
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
•Ensure storage and use of welding consumables is per manufacture’s recommendations and full certification
•Review Contractor’s field inspection and test reports
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Review welder qualifications certifications, and attend welder qualification
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place.
• Implement Cepu project Construction Surveillance Program
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Working Knowledge of:
- Piping and pressure vessel codes and quality standards (E.g. AWS D1.1, CSA B51, ASME Section III, ASME B31.3, and ISO 9001)
-Piping fabrication methods
-Welding processes and NDE techniques including evaluation methods
- Piping, Isometrics and shop Drawings
• Trained to authorize work permits (e.g. hot work, confined space, etc.)
• Good oral and written English language skills
• Well versed in safe work practices
•Demonstrated ability to communicate in multiple languages
• Minimum fifteen (15) years experience in inspection of piping systems on major onshore construction projects.
• Skills and experience in the development of commissioning and start-up budget,.
• Skills and experience in the development of manpower and vendor
support mobilization/demobilization plan and schedules, and the
development of lists of required commissioning and start-up spares,
consumables, first-fills, special tools, temporary equipment, etc.
Qualifications:
•Bachelor degree in a related field is preferable and is a plus
• Certificates in planning and budgeting from recognized institutions are preferable
Skills:
• Advance skill in project planning with Primavera and MS Project is a must
• Advance skill in the computer application software required in the project (Word, PowerPoint, Excel, etc.) is a must
• Advance skills in project estimating and budgeting is a must
10. COATING INSPECTOR (CP-A80)
RESPONSIBILITY AND DUTIES:
• Verify required coating inspection methods are performed on pipeline, including DFT, holiday testing, etc.
• Monitor mixing and application of coating by contractor.
• Maintain daily log of activities.
• Oversee application of field joint coating.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Extensive training and experience in coatings & coatings inspection, application methods & testing.
• Previous training as a NACE coatings inspector is helpful.
• Knowledge of surface preparation methods & other requirements for obtaining desired performance from coatings.
• Seven (7) years experience in coatings & coatings inspection.
• Overseas pipeline experience is helpful.
• Competent in PC skills relative to Microsoft Word, Excel, and e-mail systems.
Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.
|
|
|
About the Author
