{ -
On
7:14 AM
- 0
}
ENGINEERING JOBS
1. Welding Inspector (CP-A21)
RESPONSIBILITY AND DUTIES:
• Assist reviewing WPS, WQT records and welding inspection related QC documents
• Witness and oversee daily activities and related inspection activities in piping, structural, mechanical, and E&I disciplines. This includes visual and NDT checks like RT, MT, PT and UT.
• Witness / monitor NDT activities, and interpret / review NDT reports on RT, MT, PT and UT
• Monitor and inspect exotic material welding works (DSS, SDSS and CRA) inclusive of PMI and ferrite checks
• Monitor in-process welding parameters like fit up, purging and purging level (O2 checking), heat input and maintenance of inter-pass temperature, passivation activities, flushing, etc.
• Monitor welder performance continuously, set in motion the corrective actions when the quality levels / trend is not in acceptable levels
• Monitor welding consumable handling on site, and conduct daily spot checks in the field to ensure proper handling of welding consumables. Review original welding consumable material certificates for compliance to codes and specifications where required.
• Monitor / surveillance of material traceability in weld
• Witness / monitor weld repair activities and welding distortion correction activities
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Participate in line walk before hydro test, preparation of punch lists and follow up of the same for close out
• Witness piping hydrotest and flushing works, witness reinstatement checks for final acceptance
• Witness Nitrogen (N2) leak tests on piping systems
• Witness furnace PWHT and Local PWHT of piping works
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement Project Construction Surveillance Program
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Have minimum of 15 years in welding inspection activities working to international standards like ANSI B31.3 / API 650 / ASME Sec IX / Norsok / NACE RP 0175. Possess Minimum CSWIP 3.1 or AWS CWI welding inspector qualifications.
• Possess ASNT NDT L-II in RT / MT / PT / UT and able to review radiography to various international standards.
• Possess a proactive approach plus willingness to closely monitor and educate the exotic alloy welders
• Experience in welding and inspection of exotic alloys like Duplex SS / Super Duplex SS / Inconel 825 is mandatory and highly preferred
• Knowledge on purging and maintenance of heat input / interpass temperature required. Familiar with PMI (P-met) / Ferrite checking and review of these reports for compliance.
• Experience in working on oil and gas projects involving sour oil service is preferred
• Able to read and understand P&IDs, isometrics and GA drawings, both engineering and shop drawings
• Able to review PWHT charts and conduct in process spot checking
• Able to review hydrotest packs, witness hydrotests and reinstatement works for system acceptance
• Experienced in Nitrogen leak tests preferred
• Thorough understanding of applicable industry specifications
• Native tongue in Bahasa Indonesia with proficiency in spoken and written English language skills for official works preferred. Familiar with Microsoft Office suite of software programs, Lotus Notes, etc.
Well versed in safe work practices including co-ordination with contractors on ensuring radiation safety
2. SITE MATERIALS COORDINATOR (CP-A22) Responsibility and duties:
• Site infrastructure/logistics in host country:
1. Receiving, warehousing and issuance of material
2. Sequencing of Spare Parts – Commissioning and 2 year Operating
3. Work jointly with Construction to oversee materials requirements at site
• Materials management:
1. Administration and supervision of the Contractors Materials Management Plan and Warehousing Plan
2. Manage distribution of the materials and equipment as required
3. Project material and equipment delivery at site - interface with the Jakarta home office team
4. Apply project specifications for equipment and material preservation, packing and handling
5. Oversee Contractor’s material tracking “in transit” through receipt at job site
6. Confirm custom clearance dates and inland transportation plan dates
7. Monitor Contractor’s Long Lead Equipment and Spare Parts Transportation Plan
8. Interface with the Construction team at site on all materials / equipment issues
Required knowledge, qualifications, skills, and experiences:
• 5 years of Materials Management (at site) and Logistics experience with a project of similar size and scale
• Intermediate to Expert Equipment and Materials Logistics Skills including Contracts, Customs, Traffic, and Expediting
• Strong analytical, leadership, negotiation and communication skills
• Hands on experience with computerized materials management and tracking system
• College / University Education or equivalent
• Must be a self-starter and able to work in a virtual organization
• Good interpersonal and communication skills in English and Bahasa Indonesia. The ability to speak Javanese is an additionally desirable attribute.
• Ability to oversee and monitor EPC Contractor logistics activities including track/monitor key equipment and material movements
3. Project Controls Engineer- Field Facilities (CP-A23)
RESPONSIBILITY AND DUTIES:
• Provide stewardship for Functional Support and monthly reporting.
• Review and monitor the Contractors performance in the areas of cost estimating, scheduling and project control and provide input as necessary to make certain the Company’s objectives are achieved.
• Provide timely review of cost and schedule impact of changes, modifications or alternatives by keeping abreast of engineering, procurement and construction activities and maintain project trend and change order logs.
• Prepare all required cost and schedule reports and provide project cost input into the Project Monthly Report.
• Prepare cost forecasts to ensure budget requirements are within project expectations and keep management aware of potential budget problems as early as possible
• Review the contractor’s procedures for estimating, scheduling and project controls and modify as necessary to meet the Company’s needs.
• Assist in the preparation and review of EPC projects cost estimates and schedules and reconciliation’s utilizing the Contractor’s systems and personnel as required.
• Assist in the preparation of commercial terms and other documentations for the EPC bid packages.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Bachelor of Science in Engineering or Accounting.
• Good written and verbal communications skills.
• Good technical/business team skills, ability to work with others.
• Minimum of ten (10) years of broad experience in the areas of cost estimating, scheduling and project control and have at least five (5) years specific involvement in projects for major process facilities.
• Experience with Contractors and worldwide suppliers, in particular those involved in the construction of major onshore facilities.
• Experience with project control software programs such as Excel, Word, etc.
4. SHE&S Safety Site (CP-A24)
RESPONSIBILITY AND DUTIES:
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Conduct regular safety inspections / assessments on-site and at key off-site subcontractor locations in accordance with established project and site safety plans or as requested by site team members
• Identify and work to eliminate hazards, unsafe conditions, and unsafe acts; work with company, contractor, and subcontractor management toward achieving an injury-free work place
• Keep site management apprised of significant safety issues, safety alerts and plans / progress towards resolving issues and eliminating hazards
• Advise site team of safety initiatives, issues, challenges, and incident investigations / follow-up
• Communicate safety initiatives, achievements, experiences, and issues from other sites and projects with site team members and contractor / subcontractor safety advisors / management
• Participate in investigation and follow-up of incidents / accidents; prepare notifications / reports for communication of significant incidents to company project / functional management per project incident reporting procedures and matrix
• Coach and advise contractor / subcontractor safety professionals / management in incident investigation documentation, reporting, and follow-up, including root cause analysis and case management
• Monitor work processes to ensure compliance with the site work permit system and area / system responsibilities
• Prepare / provide a safety induction briefing to new ExxonMobil (EM) team members and EM visitors to site
• Collect and share safety lessons learned with other sites and project and functional management
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• College level education or equivalent
• 5 - 7 years in Construction Safety-related positions
• Good computer skills including Lotus Notes, Microsoft Excel, Microsoft Word and Microsoft PowerPoint
5. CIVIL INSPECTOR (CP-A25)
RESPONSIBILITY AND DUTIES:
• Oversee civil/structural related construction activities (excavation, paving, etc.) performed by the Contractor or sub-contractors in assigned coverage area.
• Read and understand project design drawings and documents in order to obtain specific knowledge of project work scope.
• Ensure that all civil/structural related activities are performed safely and in compliance with project specifications, Company standards, and regulatory requirements.
• Ensure that all required civil/structural related inspections are performed properly.
• Maintain daily log of activities.
• Facilitate communication of civil related project execution issues the Project Team.
• Communicate with the Contractor and sub-contractors to ensure that the work is executed in accordance with project specifications, Company standards, and regulatory requirements.
• Identify and assess deviations to Contract Technical Specifications and regulatory requirements; ensure that such deviations will be processed according to project procedures, maintain Deviation Control Log.
• Assist in stewarding civil/structural queries from the Contractor and sub-contractors as well as technical information requests.
• Keep Project Team informed of civil/structural progress, deviations, and execution concerns.
• Provide input on contractor performance such as worker capabilities, training, qualifications, and staffing levels.
• Assist the Project Team in obtaining civil/structural related contract documents, including those referred to in the job specification.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Broad and extensive knowledge of:
- Industry design standards, specifications, codes, and appropriate safety criteria.
- Onshore pipeline and valve station design, construction, and operations.
• Bachelor of Science Degree in engineering.
• 10+ years of closely related professional experience, 5+ years inspecting civil/structural works.
• Strong organizational, management, and technical judgment skills.
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities.
• Proficient in Microsoft Office suite of software programs, Lotus Notes, etc.
• Read, write, and speak fluent English, especially as it applies to technical and business communications.
6. ONSHORE PIPELINE CONSTRUCTION SUPERVISOR (CP – A26)
RESPONSIBILITIES AND DUTIES:
• Reports to Onshore Pipeline Construction Superintendent.
• Supervise pre-construction, mainline construction, HDD, and valve site construction while monitoring and appraising contractor performance in the areas of SSHE, quality, schedule, and cost.
• Provide input on construction plans and administration of the EPC contract. Review change requests in accordance with project management of change plan.
• Coordinate resolution of construction issues with appropriate company and contractor resources on and off site.
• Keep an accurate time log and provide Superintendent with daily notes as well as continuous verbal feedback on project progress, issues, and/or problem areas.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• BS/ME in Engineering.
• 7 years of experience in Oil and Gas with a minimum of 4 years in pipelines.
• Strong supervision skills while still able to nurture harmony in the work teams.
• Familiar with site safety issues and onshore pipeline construction methods.
• Good communication skills in both written and spoken English.
7. Environment, Regulatory & Socioeconomic Advisor (CP-A27)
RESPONSIBILITY AND DUTIES:
1. Coordinate ongoing effort to obtain various permits for EPC3&4 scope of work in a timely fashion in order to remain in compliance with National, Province, and Local regulations.
2. Interface with the functional groups as necessary to access timely support for project activities, identify/implement best practices and lessons learned
3. Work with PMT and Functional groups to support development of documents such as oil spill response plan and waste management plan.
4. Interface with project engineering and construction to ensure environmental and regulatory compliance.
5. Coordinate development and submittal of EMCAPS regulatory compliance and environmental management plans for project facilities
6. Work with consultants, as necessary, to prepare and submit requisite environmental, regulatory and socioeconomic impact assessments.
7. Interface and coordinate activities with functional groups, as appropriate, to develop and implement appropriate plans for interfacing with Non-Governmental Organisations(NGO’s) and Government agencies.
8. Review and advise PMT about EPC contractor’s environmental, regulatory and socioeconomic documents and deliverables, as prescribed in project Coordination Procedure.
9. Prepare project internal environmental, regulatory and socioeconomic stewardship reports, as well as external reports required to satisfy Government or external financial institution conditions/requests.
10. Assist project team, as appropriate, on special tasks and studies related to overall Environmental and Regulatory permitting requirements, and community affairs at shore tie-in and offshore work sites.
11. Develop amicable relationships to facilitate open communication and transparency in processes and procedures with various Government offices (BPMIGAS, SeaCom, etc) that are responsible for issuing recommendations and approvals for regulatory and environmental permits.
12. Work closely with ITS to exploit full benefits of the work scope for which ITS has been contracted.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Broad project management, technical and SH&E skills with good understanding of working in a project setting and an ability to interact amicably with various external stakeholders
• 5+ years broad-based experience preferred, with prior experience in one or more related disciplines (i.e. Environmental, Regulatory and Socioeconomic)
• Knowledge of EMCAPS process, and in particular SH&E deliverable requirements
• Knowledge of EMDC strategies and key business drivers
• Good interpersonal and communication skills in English and Bahasa Indonesia. Ability to speak Jawanese is an additionally desirable attribute.
• Adaptable to changing priorities as focus of activity is expected to vary between the three disciplines.
• Willingness to undertake business travel and/or field based short term assignments
Ability to interact proactively in the Projects interest, with EPC contractor, local Government offices and local community in East Jawa province.
8. E&I Inspector – Tower (CP-A28)
RESPONSIBILITY AND DUTIES:
• Brings to the attention of both the DCS/Instrument Engineering any significant concerns regarding the EPC Contractor’s or vendor’s performance which includes quality control, schedule control and scope of supply.
• Supervises the EPC Contractor’s design for the control facilities and systems that are specifically under his responsibility.
• Communicates with other PMT instrument and control system engineers to ensure a Provides coverage for other PMT instrumentation and control system engineers when they re absent from the EPC Contractor’s office.
• Communicates with Operating Company personnel on matters relating to the maintenance and operation of the new facilities and their interfaces to existing facilities.
• Performs timely review of specifications and documentation to ensure that project schedules are maintained
• Assist PMT in meeting RGEE expectations as required, especially RGEE Element 2 (Risk Assessment), RGEE Element 3 (Facility Design & Construction) and RGEE Element 7 (Management of Change).
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Bachelor of Science in Engineering, (preferably control systems, chemical or electrical).
• Good written and verbal communication skills.
• Good interpersonal skills.
• Familiarity with Trains 1 and 2 ICIMS Information and Control Systems.
• Technical understanding of state- of- the- art control system and information system technology.
• Minimum of fifteen (10) years technical experience in control systems discipline and have at least five years (5) specific experience working with an EPC Contractor on a large capital project.
• Experience with large scale distributed control systems and programmable electronic shutdown designs for major onshore petrochemical facilities
• Experience with worldwide suppliers of instrumentation, DCS and other digital control, communications and networked subsystems.
• Experience with contractors, vendors, and implementation sub contractors in instrumentation, communications, DCS and other digital control and networked subsystems.
• experience with hierarchical information and control system structure comprised of networked digital control, shutdown and control and information subsystems, as applied to major onshore and offshore facilities
9. Civil / Structural Inspector – Infrastructure Facilities (CP-A29)
RESPONSIBILITY AND DUTIES:
• Oversee inspection of structural activities conducted at contractors and sub-contractors facilities.
• Coordinate with other structural.
• Review original material certificates for compliance to codes and specifications
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Ensure storage and use of welding consumables is per manufacture’s recommendations and full certification
• Review Contractor’s field inspection and test reports
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Review welder qualifications certifications, and attend welder qualification
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place.
• Implement Cepu project Construction Surveillance Program
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Working Knowledge of:
- Piping and pressure vessel codes and quality standards (E.g. AWS D1.1, CSA B51, ASME Section III, ASME B31.3, and ISO 9001)
- Piping fabrication methods
- Welding processes and NDE techniques including evaluation methods
- Piping, Isometrics and shop Drawings
• Trained to authorize work permits (e.g. hot work, confined space, etc.)
• Good oral and written English language skills
• Well versed in safe work practices
• Demonstrated ability to communicate in multiple languages
• Minimum fifteen (15) years experience in inspection of piping systems on major onshore construction projects.
• Skills and experience in the development of commissioning and start-up budget,.
• Skills and experience in the development of manpower and vendor support mobilization/demobilization plan and schedules, and the development of lists of required commissioning and start-up spares, consumables, first-fills, special tools, temporary equipment, etc.
Qualifications:
• Bachelor degree in a related field is preferable and is a plus
• Certificates in planning and budgeting from recognized institutions are preferable
Skills:
• Advance skill in project planning with Primavera and MS Project is a must
• Advance skill in the computer application software required in the project (Word, PowerPoint, Excel, etc.) is a must
• Advance skills in project estimating and budgeting is a must
10. MIGAS Interface Coordinator (CP-A30)
RESPONSIBILITY AND DUTIES:
• Establish and coordinate a good communication/interface with PJIT, DJ-MIGAS and BPMIGAS on issues/tasks related to MIGAS certification activities in securing SKPP, SKKP and SKPI on time.
• Establish and maintain a good communication with Quality Inspection Coordinators, PT, BPMIGAS and DJ-MIGAS in supporting DJ-MIGAS and BPMIGAS inspection or witness on FATs, pressure tests, SATs, start-up/commissioning of all EPC facilities and other required inspections
• Provide support to Quality Inspection Coordinators on BPMIGAS and DJ-MIGAS travel arrangement including FCPA
• Provide advices on how to communicate effectively with DJ-MIGAS and BPMIGAS
• Provide advices to resolve issues with DJ-MIGAS and BPMIGAS
• Prepare and give presentation to DJ-MIGAS and BPMIGAS
• Prepare routine and non-routine report to Supervisor
• Other non-routine work in Quality as requested by Supervisor
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• BS in Engineering is preferred, or an extensive degree of technical training and experience in the field of Quality inspection or DJ-MIGAS certification
• Working knowledge of DJ-MIGAS Regulations and other Government of Indonesia Regulations required to obtain SKPP, SKKP and SKPI certificates of worthiness
• Good problem solving aptitude
• Minimum 5 years experience in DJ-MIGAS certification
• Minimum 4 years supervisory or coordination work experience
• Minimum three (3) years experiences in inspection of piping system, equipment and facilities on major onshore or offshore project is preferred
• Basic working knowledge of:
- Piping and pressure vessel codes and Quality standards (ASME section V, ASME section VIII, ASME section IXASME B31.3, B31.4, B31.8 and ISO 9001)
- Piping, Isometrics and shop Drawings
- Indonesia National Standard (SNI)
• Basic knowledge of mechanical (rotating equipment, pressure vessels, etc) instrumentation and electrical equipment (generator, transformer, MCC, switch gear, etc) and their function/running test
• Well versed in safe work practices
• Good oral and written English communication skills - report writing, invitation letter, and presentation skills
• Good computer skills – Microsoft Word, Excel and Power Point
Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.
• Assist reviewing WPS, WQT records and welding inspection related QC documents
• Witness and oversee daily activities and related inspection activities in piping, structural, mechanical, and E&I disciplines. This includes visual and NDT checks like RT, MT, PT and UT.
• Witness / monitor NDT activities, and interpret / review NDT reports on RT, MT, PT and UT
• Monitor and inspect exotic material welding works (DSS, SDSS and CRA) inclusive of PMI and ferrite checks
• Monitor in-process welding parameters like fit up, purging and purging level (O2 checking), heat input and maintenance of inter-pass temperature, passivation activities, flushing, etc.
• Monitor welder performance continuously, set in motion the corrective actions when the quality levels / trend is not in acceptable levels
• Monitor welding consumable handling on site, and conduct daily spot checks in the field to ensure proper handling of welding consumables. Review original welding consumable material certificates for compliance to codes and specifications where required.
• Monitor / surveillance of material traceability in weld
• Witness / monitor weld repair activities and welding distortion correction activities
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Participate in line walk before hydro test, preparation of punch lists and follow up of the same for close out
• Witness piping hydrotest and flushing works, witness reinstatement checks for final acceptance
• Witness Nitrogen (N2) leak tests on piping systems
• Witness furnace PWHT and Local PWHT of piping works
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement Project Construction Surveillance Program
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Have minimum of 15 years in welding inspection activities working to international standards like ANSI B31.3 / API 650 / ASME Sec IX / Norsok / NACE RP 0175. Possess Minimum CSWIP 3.1 or AWS CWI welding inspector qualifications.
• Possess ASNT NDT L-II in RT / MT / PT / UT and able to review radiography to various international standards.
• Possess a proactive approach plus willingness to closely monitor and educate the exotic alloy welders
• Experience in welding and inspection of exotic alloys like Duplex SS / Super Duplex SS / Inconel 825 is mandatory and highly preferred
• Knowledge on purging and maintenance of heat input / interpass temperature required. Familiar with PMI (P-met) / Ferrite checking and review of these reports for compliance.
• Experience in working on oil and gas projects involving sour oil service is preferred
• Able to read and understand P&IDs, isometrics and GA drawings, both engineering and shop drawings
• Able to review PWHT charts and conduct in process spot checking
• Able to review hydrotest packs, witness hydrotests and reinstatement works for system acceptance
• Experienced in Nitrogen leak tests preferred
• Thorough understanding of applicable industry specifications
• Native tongue in Bahasa Indonesia with proficiency in spoken and written English language skills for official works preferred. Familiar with Microsoft Office suite of software programs, Lotus Notes, etc.
Well versed in safe work practices including co-ordination with contractors on ensuring radiation safety
• Site infrastructure/logistics in host country:
1. Receiving, warehousing and issuance of material
2. Sequencing of Spare Parts – Commissioning and 2 year Operating
3. Work jointly with Construction to oversee materials requirements at site
• Materials management:
1. Administration and supervision of the Contractors Materials Management Plan and Warehousing Plan
2. Manage distribution of the materials and equipment as required
3. Project material and equipment delivery at site - interface with the Jakarta home office team
4. Apply project specifications for equipment and material preservation, packing and handling
5. Oversee Contractor’s material tracking “in transit” through receipt at job site
6. Confirm custom clearance dates and inland transportation plan dates
7. Monitor Contractor’s Long Lead Equipment and Spare Parts Transportation Plan
8. Interface with the Construction team at site on all materials / equipment issues
Required knowledge, qualifications, skills, and experiences:
• 5 years of Materials Management (at site) and Logistics experience with a project of similar size and scale
• Intermediate to Expert Equipment and Materials Logistics Skills including Contracts, Customs, Traffic, and Expediting
• Strong analytical, leadership, negotiation and communication skills
• Hands on experience with computerized materials management and tracking system
• College / University Education or equivalent
• Must be a self-starter and able to work in a virtual organization
• Good interpersonal and communication skills in English and Bahasa Indonesia. The ability to speak Javanese is an additionally desirable attribute.
• Ability to oversee and monitor EPC Contractor logistics activities including track/monitor key equipment and material movements
• Provide stewardship for Functional Support and monthly reporting.
• Review and monitor the Contractors performance in the areas of cost estimating, scheduling and project control and provide input as necessary to make certain the Company’s objectives are achieved.
• Provide timely review of cost and schedule impact of changes, modifications or alternatives by keeping abreast of engineering, procurement and construction activities and maintain project trend and change order logs.
• Prepare all required cost and schedule reports and provide project cost input into the Project Monthly Report.
• Prepare cost forecasts to ensure budget requirements are within project expectations and keep management aware of potential budget problems as early as possible
• Review the contractor’s procedures for estimating, scheduling and project controls and modify as necessary to meet the Company’s needs.
• Assist in the preparation and review of EPC projects cost estimates and schedules and reconciliation’s utilizing the Contractor’s systems and personnel as required.
• Assist in the preparation of commercial terms and other documentations for the EPC bid packages.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Bachelor of Science in Engineering or Accounting.
• Good written and verbal communications skills.
• Good technical/business team skills, ability to work with others.
• Minimum of ten (10) years of broad experience in the areas of cost estimating, scheduling and project control and have at least five (5) years specific involvement in projects for major process facilities.
• Experience with Contractors and worldwide suppliers, in particular those involved in the construction of major onshore facilities.
• Experience with project control software programs such as Excel, Word, etc.
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Conduct regular safety inspections / assessments on-site and at key off-site subcontractor locations in accordance with established project and site safety plans or as requested by site team members
• Identify and work to eliminate hazards, unsafe conditions, and unsafe acts; work with company, contractor, and subcontractor management toward achieving an injury-free work place
• Keep site management apprised of significant safety issues, safety alerts and plans / progress towards resolving issues and eliminating hazards
• Advise site team of safety initiatives, issues, challenges, and incident investigations / follow-up
• Communicate safety initiatives, achievements, experiences, and issues from other sites and projects with site team members and contractor / subcontractor safety advisors / management
• Participate in investigation and follow-up of incidents / accidents; prepare notifications / reports for communication of significant incidents to company project / functional management per project incident reporting procedures and matrix
• Coach and advise contractor / subcontractor safety professionals / management in incident investigation documentation, reporting, and follow-up, including root cause analysis and case management
• Monitor work processes to ensure compliance with the site work permit system and area / system responsibilities
• Prepare / provide a safety induction briefing to new ExxonMobil (EM) team members and EM visitors to site
• Collect and share safety lessons learned with other sites and project and functional management
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• College level education or equivalent
• 5 - 7 years in Construction Safety-related positions
• Good computer skills including Lotus Notes, Microsoft Excel, Microsoft Word and Microsoft PowerPoint
• Oversee civil/structural related construction activities (excavation, paving, etc.) performed by the Contractor or sub-contractors in assigned coverage area.
• Read and understand project design drawings and documents in order to obtain specific knowledge of project work scope.
• Ensure that all civil/structural related activities are performed safely and in compliance with project specifications, Company standards, and regulatory requirements.
• Ensure that all required civil/structural related inspections are performed properly.
• Maintain daily log of activities.
• Facilitate communication of civil related project execution issues the Project Team.
• Communicate with the Contractor and sub-contractors to ensure that the work is executed in accordance with project specifications, Company standards, and regulatory requirements.
• Identify and assess deviations to Contract Technical Specifications and regulatory requirements; ensure that such deviations will be processed according to project procedures, maintain Deviation Control Log.
• Assist in stewarding civil/structural queries from the Contractor and sub-contractors as well as technical information requests.
• Keep Project Team informed of civil/structural progress, deviations, and execution concerns.
• Provide input on contractor performance such as worker capabilities, training, qualifications, and staffing levels.
• Assist the Project Team in obtaining civil/structural related contract documents, including those referred to in the job specification.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Broad and extensive knowledge of:
- Industry design standards, specifications, codes, and appropriate safety criteria.
- Onshore pipeline and valve station design, construction, and operations.
• Bachelor of Science Degree in engineering.
• 10+ years of closely related professional experience, 5+ years inspecting civil/structural works.
• Strong organizational, management, and technical judgment skills.
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities.
• Proficient in Microsoft Office suite of software programs, Lotus Notes, etc.
• Read, write, and speak fluent English, especially as it applies to technical and business communications.
• Reports to Onshore Pipeline Construction Superintendent.
• Supervise pre-construction, mainline construction, HDD, and valve site construction while monitoring and appraising contractor performance in the areas of SSHE, quality, schedule, and cost.
• Provide input on construction plans and administration of the EPC contract. Review change requests in accordance with project management of change plan.
• Coordinate resolution of construction issues with appropriate company and contractor resources on and off site.
• Keep an accurate time log and provide Superintendent with daily notes as well as continuous verbal feedback on project progress, issues, and/or problem areas.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• BS/ME in Engineering.
• 7 years of experience in Oil and Gas with a minimum of 4 years in pipelines.
• Strong supervision skills while still able to nurture harmony in the work teams.
• Familiar with site safety issues and onshore pipeline construction methods.
• Good communication skills in both written and spoken English.
1. Coordinate ongoing effort to obtain various permits for EPC3&4 scope of work in a timely fashion in order to remain in compliance with National, Province, and Local regulations.
2. Interface with the functional groups as necessary to access timely support for project activities, identify/implement best practices and lessons learned
3. Work with PMT and Functional groups to support development of documents such as oil spill response plan and waste management plan.
4. Interface with project engineering and construction to ensure environmental and regulatory compliance.
5. Coordinate development and submittal of EMCAPS regulatory compliance and environmental management plans for project facilities
6. Work with consultants, as necessary, to prepare and submit requisite environmental, regulatory and socioeconomic impact assessments.
7. Interface and coordinate activities with functional groups, as appropriate, to develop and implement appropriate plans for interfacing with Non-Governmental Organisations(NGO’s) and Government agencies.
8. Review and advise PMT about EPC contractor’s environmental, regulatory and socioeconomic documents and deliverables, as prescribed in project Coordination Procedure.
9. Prepare project internal environmental, regulatory and socioeconomic stewardship reports, as well as external reports required to satisfy Government or external financial institution conditions/requests.
10. Assist project team, as appropriate, on special tasks and studies related to overall Environmental and Regulatory permitting requirements, and community affairs at shore tie-in and offshore work sites.
11. Develop amicable relationships to facilitate open communication and transparency in processes and procedures with various Government offices (BPMIGAS, SeaCom, etc) that are responsible for issuing recommendations and approvals for regulatory and environmental permits.
12. Work closely with ITS to exploit full benefits of the work scope for which ITS has been contracted.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Broad project management, technical and SH&E skills with good understanding of working in a project setting and an ability to interact amicably with various external stakeholders
• 5+ years broad-based experience preferred, with prior experience in one or more related disciplines (i.e. Environmental, Regulatory and Socioeconomic)
• Knowledge of EMCAPS process, and in particular SH&E deliverable requirements
• Knowledge of EMDC strategies and key business drivers
• Good interpersonal and communication skills in English and Bahasa Indonesia. Ability to speak Jawanese is an additionally desirable attribute.
• Adaptable to changing priorities as focus of activity is expected to vary between the three disciplines.
• Willingness to undertake business travel and/or field based short term assignments
Ability to interact proactively in the Projects interest, with EPC contractor, local Government offices and local community in East Jawa province.
• Brings to the attention of both the DCS/Instrument Engineering any significant concerns regarding the EPC Contractor’s or vendor’s performance which includes quality control, schedule control and scope of supply.
• Supervises the EPC Contractor’s design for the control facilities and systems that are specifically under his responsibility.
• Communicates with other PMT instrument and control system engineers to ensure a Provides coverage for other PMT instrumentation and control system engineers when they re absent from the EPC Contractor’s office.
• Communicates with Operating Company personnel on matters relating to the maintenance and operation of the new facilities and their interfaces to existing facilities.
• Performs timely review of specifications and documentation to ensure that project schedules are maintained
• Assist PMT in meeting RGEE expectations as required, especially RGEE Element 2 (Risk Assessment), RGEE Element 3 (Facility Design & Construction) and RGEE Element 7 (Management of Change).
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Bachelor of Science in Engineering, (preferably control systems, chemical or electrical).
• Good written and verbal communication skills.
• Good interpersonal skills.
• Familiarity with Trains 1 and 2 ICIMS Information and Control Systems.
• Technical understanding of state- of- the- art control system and information system technology.
• Minimum of fifteen (10) years technical experience in control systems discipline and have at least five years (5) specific experience working with an EPC Contractor on a large capital project.
• Experience with large scale distributed control systems and programmable electronic shutdown designs for major onshore petrochemical facilities
• Experience with worldwide suppliers of instrumentation, DCS and other digital control, communications and networked subsystems.
• Experience with contractors, vendors, and implementation sub contractors in instrumentation, communications, DCS and other digital control and networked subsystems.
• experience with hierarchical information and control system structure comprised of networked digital control, shutdown and control and information subsystems, as applied to major onshore and offshore facilities
• Oversee inspection of structural activities conducted at contractors and sub-contractors facilities.
• Coordinate with other structural.
• Review original material certificates for compliance to codes and specifications
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Ensure storage and use of welding consumables is per manufacture’s recommendations and full certification
• Review Contractor’s field inspection and test reports
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Review welder qualifications certifications, and attend welder qualification
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place.
• Implement Cepu project Construction Surveillance Program
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Working Knowledge of:
- Piping and pressure vessel codes and quality standards (E.g. AWS D1.1, CSA B51, ASME Section III, ASME B31.3, and ISO 9001)
- Piping fabrication methods
- Welding processes and NDE techniques including evaluation methods
- Piping, Isometrics and shop Drawings
• Trained to authorize work permits (e.g. hot work, confined space, etc.)
• Good oral and written English language skills
• Well versed in safe work practices
• Demonstrated ability to communicate in multiple languages
• Minimum fifteen (15) years experience in inspection of piping systems on major onshore construction projects.
• Skills and experience in the development of commissioning and start-up budget,.
• Skills and experience in the development of manpower and vendor support mobilization/demobilization plan and schedules, and the development of lists of required commissioning and start-up spares, consumables, first-fills, special tools, temporary equipment, etc.
Qualifications:
• Bachelor degree in a related field is preferable and is a plus
• Certificates in planning and budgeting from recognized institutions are preferable
Skills:
• Advance skill in project planning with Primavera and MS Project is a must
• Advance skill in the computer application software required in the project (Word, PowerPoint, Excel, etc.) is a must
• Advance skills in project estimating and budgeting is a must
• Establish and coordinate a good communication/interface with PJIT, DJ-MIGAS and BPMIGAS on issues/tasks related to MIGAS certification activities in securing SKPP, SKKP and SKPI on time.
• Establish and maintain a good communication with Quality Inspection Coordinators, PT, BPMIGAS and DJ-MIGAS in supporting DJ-MIGAS and BPMIGAS inspection or witness on FATs, pressure tests, SATs, start-up/commissioning of all EPC facilities and other required inspections
• Provide support to Quality Inspection Coordinators on BPMIGAS and DJ-MIGAS travel arrangement including FCPA
• Provide advices on how to communicate effectively with DJ-MIGAS and BPMIGAS
• Provide advices to resolve issues with DJ-MIGAS and BPMIGAS
• Prepare and give presentation to DJ-MIGAS and BPMIGAS
• Prepare routine and non-routine report to Supervisor
• Other non-routine work in Quality as requested by Supervisor
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• BS in Engineering is preferred, or an extensive degree of technical training and experience in the field of Quality inspection or DJ-MIGAS certification
• Working knowledge of DJ-MIGAS Regulations and other Government of Indonesia Regulations required to obtain SKPP, SKKP and SKPI certificates of worthiness
• Good problem solving aptitude
• Minimum 5 years experience in DJ-MIGAS certification
• Minimum 4 years supervisory or coordination work experience
• Minimum three (3) years experiences in inspection of piping system, equipment and facilities on major onshore or offshore project is preferred
• Basic working knowledge of:
- Piping and pressure vessel codes and Quality standards (ASME section V, ASME section VIII, ASME section IXASME B31.3, B31.4, B31.8 and ISO 9001)
- Piping, Isometrics and shop Drawings
- Indonesia National Standard (SNI)
• Basic knowledge of mechanical (rotating equipment, pressure vessels, etc) instrumentation and electrical equipment (generator, transformer, MCC, switch gear, etc) and their function/running test
• Well versed in safe work practices
• Good oral and written English communication skills - report writing, invitation letter, and presentation skills
• Good computer skills – Microsoft Word, Excel and Power Point
Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.
About the Author
