{ -
On
9:27 AM
- 0
}
ENGINEERING JOBS
A leading and experienced EPCC contractor providing total solutions to meet the demands of its clients in the areas of Oil & Gas, Petrochemicals & Gas Facilities and Industrial Plants, is looking for suitable qualified employees who is rightly motivated and who seeks challenging and exciting career to fill the following positions in Kuala Lumpur, Malaysia office.
Piping Engineer
Requirements:
Responsibilities:
Electrical Engineer
Requirements:
Responsibilities:
· Responsible for delivering Electrical design engineering work efficiently and in a timely manner during proposal and project delivery stage.
· Electrical Design & Engineering Work – to develop engineering design work based on requirements and to coordinate with other departments on the design work.
· Preparing pre-commissioning/ commissioning procedure and assistance.
· Construction Assistance – to provide supervision at the construction site (depends on projects varies from few days to few months).
· Procurement Assistance – to provide data sheet to Procurement, prepare bid tabulation and conduct evaluation on vendors’ quotation.
Mechanical Engineer
Requirements:
Responsibilities:
Instrument Engineer
Requirements:
· Candidates must posses at least a Degree in Electronics, Instrumentation or Chemical Engineering background.
· Minimum 5 years experience with at least 3 years of engineering design experience in Oil & Gas and Petrochemical industries.
· Experienced in handling rejuvenation and revamp project.
· Familiar with international codes and standard (especially IEC, ISA, etc.)
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
· Experienced in Instrument installation or commissioning.
· Knowledge with SPI INTOOLS software.
· Good command in Malay and English (spoken and written).
· Able to work in team and posses excellent interpersonal and communication skills.
Responsibilities:
Process Engineer
Requirements:
· Bachelor Degree in Chemical Engineering
· Priority for candidates with 3-4 years process engineering experience in Oil & Gas and Petrochemical fields
· Fluent in English and Bahasa Malaysia
· Willing to travel and station at site
· Willing to work for long hours
· Knowledge in AUTOCAD is a plus
· PC literate (MS Office)
· Good interpersonal, communication, writing and presentation skills.
· Familiarity with API and Petronas Standards.
· Process Simulation Experience in PRO II.
· Posses key skills such as Flexibility, Team Work, Problem Solving and Good Communication.
· Member of professional body is an advantage.
Responsibilities:
· Involve in various engineering stage such as Basic and Detail Engineering.
· Participate in ITB study and prepare bid specifications
· Preparation Process Drawings such as Process Flow Shem, Piping & Instrumentation
Diagram and other deliverables
· Support precommissioning and commissioning activity
· Interface with other internal disciplines such as Mechanical, Piping, Instrument
· Accountable for success completion of assigned engineering tasks
· Interface with clients and vendor to define project scope
· Participation in Client, Vendor and Internal meetings.
· Able to resolve technical issues
A leading and experienced EPCC contractor providing total solutions to meet the demands of its clients in the areas of Oil & Gas, Petrochemicals & Gas Facilities and Industrial Plants, is looking for suitable qualified employees who is rightly motivated and who seeks challenging and exciting career to fill the following positions in Kuala Lumpur, Malaysia office.
Piping Engineer
Requirements:
· Candidate must possess at least Degree in
Mechanical or Material Engineering.
· Minimum 5 years of piping design experience in Oil & Gas,
Petrochemical industries.
·Familiar with international codes and
standard (especially ASME31.3, ASME, API, PTS, SHELL DEP, etc.)
· Good knowledge in preparation of engineering specifications and Job
instructions for piping designs, insulation, painting etc.
·Good knowledge in Plant Layout Planning
and Detailed Piping Design in view of Construction, Process Flow Scheme,
Machinery Operation etc.
· Familiar with
coordination work with Civil & Structural, Mechanical, Instrumentation and
Electrical interfacing with regard to layout and piping design.
· Able to carry out site survey in order to
gain required information and/or verification of existing plant documentation.
· Having previous experience in Greenfield, Brownfield and
plant modification projects.
· Able to work in team and
posses excellent interpersonal, communication and writing skills.
· Well verse with CAESAR II
and AUTOCAD software.
· Experience in PDS / CADWORX 3D Cad would
be added advantage.
· PC literate (MS Word, Excel, PowerPoint,
and MS Project as a minimum).
· Good command in English (spoken and
written).
· Establish standard and concept for the
work to comply with job requirement.
· Responsible in pipe routing and equipment
layout planning study.
· Responsible in engineering design works
such as plot plan, key plan, Underground and Above ground piping arrangement,
construction isometric and pipe support detail drawing, field fabrication part,
etc.
·Responsible to review information drawings
such as civil information, nozzle orientation, vessel clip, instrument
component information and process information (piping isometric for calculation
of hydraulic delta-p, etc.)
· Review all internal design check (IDC)
documents from all disciplines.
· Coordination work
with Civil & Structural, Mechanical, Instrumentation and Electrical
interfacing with regard to layout and piping design.
· Prepare project schedule and
· Liaise with clients and vendors for
technical issues.
· Responsible in planning, scheduling,
quality control of designated project to ensure that objective of the project
are accomplished within the prescribed time frame and budget.
· Assist construction and commissioning
activities (Field/Site works).
Electrical Engineer
Requirements:
· Posses a Degree in Electrical
Engineering.
· At least 5 years of working experience
preferably in Oil & Gas industry.
· Capable to prepare electrical
deliverables such as Single Line Diagram, Load Schedule, Motor Control
Schedule, Cable Schedule, Cable routing drawing, Power and Control drawing,
Area Classification drawing, grounding drawing, etc.
·Sufficient knowledge of International
Codes & Standards in relation to Electrical Design.
· Able to undertake works in electrical
design up to construction at site (supervision).
·Experience in Project Engineering,
Preparation of Electrical Inquiry Documents and commercial/technical Bid
Evaluation. MTO and Cost Estimation and Inter-Discipline coordination.
· Familiar with Electrical Equipments
such as Transformers, HV & LV Switchgear, MCC, Motors, UPS, LCS,
Communication equipments, etc.
· Able to perform Electrical calculation such
as Cable sizing/Voltage Drop calculation, Short circuit study, etc.
· PC literate (MS Word, Excel &
PowerPoint) and knowledge in Auto-Cad.
· Ability to work in team, possess
excellent communication and interpersonal skills.
· Responsible for delivering Electrical design engineering work efficiently and in a timely manner during proposal and project delivery stage.
· Electrical Design & Engineering Work – to develop engineering design work based on requirements and to coordinate with other departments on the design work.
· Preparing pre-commissioning/
· Construction Assistance – to provide supervision at the construction site (depends on projects varies from few days to few months).
· Procurement Assistance – to provide data sheet to Procurement, prepare bid tabulation and conduct evaluation on vendors’ quotation.
Mechanical Engineer
Requirements:
· Posses
a Degree in Mechanical Engineering from a recognized university.
· Min
5 to 8 years of design experience in the Oil & Gas industry.
· Knowledgeable
in API, ASME codes and sound experience in handling Rotating machineries such
as Pumps, Gas Compressors and Turbines.
· Able
to do inter-discipline co-ordination and possess good communication skills with
clients and sub-contractor.
· PC
literate (MS Word / Excel, PowerPoint and AutoCAD)
· Independent,
self-motivated individual with good communication and interpersonal skills.
· Rotating
Equipment Engineer shall execute EPC projects in mechanical department, with
responsibilities of preparing job execution plan, machinery specifications,
data sheet for vendor inquiry, requisitions, vendor technical evaluation
reports, check/review/clarify vendor’s bids, vendor’s documents and P&ID
related to rotary machinery.
· The
position is also responsible for controlling quality, cost, engineering
schedule and work hours, and coordinating with clients/other engineering
departments/engineering subcontractors/vendors.
· The
position is also responsible to instruct and coordinates with subordinates and
other discipline engineers.Instrument Engineer
Requirements:
· Candidates must posses at least a Degree in Electronics, Instrumentation or Chemical Engineering background.
· Minimum 5 years experience with at least 3 years of engineering design experience in Oil & Gas and Petrochemical industries.
· Experienced in handling rejuvenation and revamp project.
· Familiar with international codes and standard (especially IEC, ISA, etc.)
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
· Experienced in Instrument installation or commissioning.
· Knowledge with SPI INTOOLS software.
· Good command in Malay and English (spoken and written).
· Able to work in team and posses excellent interpersonal and communication skills.
· Responsible
for delivering instrument engineering design work efficiently and in a timely
manner during proposal and project delivery stage.
· Preparation
of instrument datasheet, instrument list, I/O list.
· Preparation
of instrument sizing for flow element and valves.
· Familiar
with IPF methodology and implementation.
· Control
system such as DCS (Honeywell), ESD PLC, mechanical equipment package control
system PLC and relay base system.
· Preparation
of loop drawings, interlock logic diagram.
· Preparation
of cable schedule, cable connection list, junction box schedule, etc.
· Preparation
of typical installation drawing, instrumentation hook-up drawings.
· Preparation
of construction drawings such as instrument plot plan, wiring layout, etc.
· Preparation
of Material Take-off for installations.
Requirements:
· Bachelor Degree in Chemical Engineering
· Priority for candidates with 3-4 years process engineering experience in Oil & Gas and Petrochemical fields
· Fluent in English and Bahasa Malaysia
· Willing to travel and station at site
· Willing to work for long hours
· Knowledge in AUTOCAD is a plus
· PC literate (MS Office)
· Good interpersonal, communication, writing and presentation skills.
· Familiarity with API and Petronas Standards.
· Process Simulation Experience in PRO II.
· Posses key skills such as Flexibility, Team Work, Problem Solving and Good Communication.
· Member of professional body is an advantage.
Responsibilities:
· Involve in various engineering stage such as Basic and Detail Engineering.
· Participate in ITB study and prepare bid specifications
· Preparation Process Drawings such as Process Flow Shem, Piping & Instrumentation
Diagram and other deliverables
· Support precommissioning and commissioning activity
· Interface with other internal disciplines such as Mechanical, Piping, Instrument
· Accountable for success completion of assigned engineering tasks
· Interface with clients and vendor to define project scope
· Participation in Client, Vendor and Internal meetings.
· Able to resolve technical issues
Interested candidates are invited to send
e-mail their resume giving full personal details, educational qualification,
working experience, present and expected salary, together with recent passport size photograph and
indicate the position applied for on the subject to:-
We apologize that only
shortlisted candidates will be notified