PT. SUPRACO INDONESIA
Jakarta based company with more than 32 years of experience in providing
services to oil and gas industry and Geothermal in Indonesia. We are
seeking for best candidates to fill the vacant positions for our
projects
1. Site Material Coordinator Field Facilities (CP-A61)
Responsibility and duties:
• Site infrastructure/logistics in host country:
1. Receiving, warehousing and issuance of material
2. Sequencing of Spare Parts – Commissioning and 2 year Operating
3. Work jointly with Construction to oversee materials requirements at site
• Materials management:
1. Administration and supervision of the Contractor’s Materials Management Plan and Warehousing Plan
2. Manage distribution of the materials and equipment as required
3. Project material and equipment delivery at site - interface with the Jakarta home office team
4. Apply project specifications for equipment and material preservation, packing and handling
5. Oversee Contractor’s material tracking “in transit” through receipt at job site
6. Confirm custom clearance dates and inland transportation plan dates
7. Monitor Contractor’s Long Lead Equipment and Spare Parts Transportation Plan
8. Interface with the Construction team at site on all materials / equipment issues
Required knowledge, qualifications, skills, and experiences:
• 5 years of Materials Management (at site) and Logistics experience with a project of similar size and scale
• Intermediate to Expert Equipment and Materials Logistics Skills including Contracts, Customs, Traffic, and Expediting
• Strong analytical, leadership, negotiation and communication skills
• Hands on experience with computerized materials management and tracking system
• College / University Education or equivalent
• Must be a self-starter and able to work in a virtual organization
•
Good interpersonal and communication skills in English and Bahasa
Indonesia. The ability to speak Javanese is an additionally desirable
attribute.
• Ability to oversee and monitor EPC Contractor
logistics activities including track/monitor key equipment and material
movements
• Placement : CEPU
2. E&I Inspector – Field Facilities (CP-A62)
RESPONSIBILITY AND DUTIES:
• Oversee and monitor inspection of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
• Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
• Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
•
Jointly develop E&I inspection check lists or review the check
lists generated by the Contractor for compliance to project requirements
•
Witness instrument calibration at contractor facilities and / or in the
field for permanent project materials and temporary test instruments /
equipments used in E&I construction works
• Co-ordinate with Contractor and construction on cable tray routing and installation inspection
•
Ensure cable pulling and termination using proper crimping tools are
done as per approved cable schedules and project specifications. Check
cable ID markers for traceability.
• Witness installation inspection of E&I control panels (both local and inside the control rooms)
• Monitor and witness continuity and meggering inspection works for cables
• Monitor cable laying works in trenches, through ducts and on cable trays
• Witness loop checks and review records for the same
• Inspect installation and testing of instrument tubing works
•
Review Contractor’s field inspection and test reports and ensure that
inspections are carried out as per approved ITP requirements
• Assist and co-ordinate with other disciplines on electrical motors installation and alignments
• Interface, participate or co-ordinate in E&I pre-commissioning activities as required
• Preparation of punch lists
•
Verify Contractor / Subcontractor Quality management systems, plans,
procedures, and processes are in place. Implement Cepu project
Construction Surveillance Program.
• Periodically audit the Contractor’s inspection data base for correctness and updating.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
•
Minimum ten (10) years experience in inspection of E&I works on
major onshore construction projects out of which at least 3 years
experience as senior QC E&I inspector
• Experienced in witnessing
SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of
Electrical & Instrument control systems
• Exposure to DCS instrumentation works and commissioning of the same
• Experienced in conducting field QA audits on E&I works
• Thorough knowledge on International standards on E&I like IEC etc.
• Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
• Demonstrated ability to communicate in multiple languages
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base.
• Placement : CEPU
3. Machinery inspector Field Facilities (CP-A63)
RESPONSIBILITY AND DUTIES:
• Oversee receiving and
installation inspection of rotating / static equipments conducted at
contractors, sub-contractors facilities and field
• Coordinate with other structural / civil disciplines for foundations checking / leveling before installation
•
Witness / participate in equipment leveling / alignment (mill wright)
works which includes both hot and cold alignments. Review and sign-off
the same. Verify fabrication fit-up, alignment, and dimensional
tolerances.
• Witness / participate in mechanical equipment receiving inspection works upon receipt at site
•
Monitor the implementation of contractor’s mechanical equipment
preservation program and report any quality issues to the site
verification lead
• Conduct equipment internals inspection and participate in equipment close out / box up inspections
• Generate punch lists and co-ordinate with contractor for follow up and close out of the same
• Review original material certificates for compliance to codes and specifications where required
• Ensure testing, measuring, welding, and NDE equipment are fully calibrated and has current certification
• Monitor the use of welding consumables is per manufacturer’s recommendations and full certification
• Review Contractor’s field inspection and test reports
• Review welder qualifications certifications, and attend welder qualification
•
Verify Contractor, Subcontractor Quality management systems, plans,
procedures, and processes are in place. Issue NCR where
non-conformances are noted and maintenance of the data base.
• Implement EPC1 Field Facilities Construction Surveillance Program
• Assist MIGAS certification team towards SKPP / SKPI
• Where required, provide inspection assistance to equipment painting and insulation works
• Co-ordinate with HSE plus rigging team to ensure safe lifting and positioning of equipments
• Monitor bolt torque tightening works where applicable and review the records
• Witness valve testing at shop / site and safety relief valve pop up tests where required
• Witness load tests for project permanent cranes when required
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
•
Minimum fifteen (15) years experience in inspection of machinery (both
rotating and static equipments) on major onshore construction projects
• Knowledgeable on international standards like ANSI, API, ASME etc. on equipment installation and inspection
•
Exposure to fabrication / installation inspection of skid mounted
package equipments, stand alone static / rotating equipments like pumps,
compressors, diesel generators, vessels etc. in onshore oil and gas
projects.
• Experienced in hot and cold alignment works of rotating
equipments. Knowledge on use of specialised tools for alignment / leveling purposes.
• Experienced in equipment internal inspection works, hydrotests / leak tests etc.
• Able to read GA drawings and equipment installation drawings. Also
read P&ID and isometric drawings for interfacing activities.
•
Exposure to safe rigging and lifting practices for safe lifting and
installation of equipments / skids. Able to understand and then
co-ordinate with HSE / Rigging teams for safe installation practices.
• Working knowledge on painting and insulation works
• Knowledge on bolt torque tightening works
• Exposure to SKPI requirements for equipment installation certification
• Familiar with MIGAS regulations for cranes load testing
• Experienced in shop / field valve testing works as per API, ANSI / ASME persyaratan
• Experienced in witnessing safety relief valve pop–up testing
• Experienced in installation inspection of heat tracing piping / tubing works
• Exposure to work permits system (e.g. hot work, confined space etc.) and implementation of safe work practices
• Good oral and written English language skills. Demonstrated ability to communicate in multiple languages.
• Well versed in safe work practices
• Placement : CEPU
4. Domestic Content Coordinator (CP-A64)
RESPONSIBILITY AND DUTIES:
• Follow, analyze and distribute as necessary the Domestic Content Surveyor reports
• Assist Project Teams as an expert in APDN and Domestic content calculation
• Provide guidance in how to improve Domestic Content realization
• Support project teams in case of Contractors / subcontractors / vendors claims relating to Domestic Content
• Interface with BPMIGAS as needed by the Project. Be the main contact of BPMIGAS TKDN division
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• College Degree
• Experience working in procurement and/or in a Domestic Content survey
• Strong knowledge of PTK 007 and TKDN requirements
• Placement : CEPU
5. Expediting/ Logistic Coordinator - Field Facilities (CP-A65)
RESPONSIBILITY AND DUTIES:
• MATERIALS MANAGEMENT:
• Administration and supervision of the Contractor’s Materials Management Plan and Warehousing Plan
• Manage distribution of the materials and equipment as required
• Project material and equipment delivery at site
• Apply project specifications for equipment and material preservation, packing and handling
• Oversee Contractor’s material tracking “in transit” through receipt at job site
• Confirm custom clearance dates and inland transportation plan dates
• Monitor and supervise Contractor’s piping bulk material procurement/ expediting including logistics
• Interface with the Construction team at site on all materials / equipment issues
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• 5 years of Materials Management and Logistics experience with a project of similar size and scale
• Intermediate to Expert Equipment and Materials Logistics Skills including Contracts, Customs, Traffic, and Expediting
• Strong analytical, leadership, negotiation and communication skills
• Hands on experience with computerized materials management and tracking system
• College / University Education or equivalent
• Must be a self-starter and able to work in a virtual organization
•
Good interpersonal and communication skills in English and Bahasa
Indonesia. The ability to speak Javanese is an additionally desirable
attribute.
• Ability to oversee and monitor EPC Contractor
logistics activities including track/monitor key equipment and material
movements
• Placement : CEPU
6. Mechanical Engineer (CP-A66)
Additional Scope: as Maintenance Scheduler
Qualification:
7. S1 in Mechanical Engineering with minimum 5 years experience
8. Applied process piping design
9. Understand PFD and P&ID
10. Advance knowledge in pump and pumping
11. Applied knowledge of mechanic of material and machine elements
12. Advance knowledge and skill in Hydraulic calculation & thermodynamic
13. Applied knowledge of Project Management
14. Piping design & construction as Discipline/Design Engineer
15. Capable in operating MS Office, MS Project
16. Fluent in English, written & spoken
Placement : West Java
7. Civil Engineer (CP-A67)
Qualification:
• Minimum S1 in Civil Engineering with minimum 5
years experience as Civil Engineer of Maintenance or Construction in
high building project, road and bridge project, etc
• Applied
knowledge of civil engineering design and calculation (structure, road,
building, and earthworks) and applied survey engineering
• Applied knowledge in Project management
• Applied knowledge and skill of lifting, rigging and scaffolding
• Structural work and construction project as Project Engineer (2 years)
• Structural steel and construction project as Discipline/ Design Engineer (3 years)
• Understand well with general civil project (road, drainage, slope stabilization, hydro)
• Have good computer skills in Ms Office, Ms Project, Auto Cad
• Fluent in English, speaking & writing
•
Basic knowledge of Safety & Environment (LOTO, permit system,
lifting, rigging, scaffolding, fire protection, hydrocarbon management,
etc)
• Understand well with API, ANSI, ASTM, ASME, Civil standard
• Understand well with other design and construction of process facilities modification, upgrade, or new design
• Have ability to do work planning
• Understand with safety and potential hazard on working location
• Skillful, competent and high motivated
•Placement : West Java
8. Civil Supervisor (CP-A68)
Qualification:
• Minimum Diploma in Civil Engineering with minimum 5 years experience as Civil Supervisor
•
Applied knowledge of civil engineering design and calculation
(structure, road, building, and earthworks) and applied survey
engineering
• Applied knowledge in Project management
• Applied knowledge and skill of lifting, rigging and scaffolding
• Structural steel and construction project as Discipline/ Design Engineer (3 years)
• Understand well with general civil project (road, drainage, slope stabilization, hydro)
• Have good computer skills in Ms Office, Ms Project, Auto Cad
• Fluent in English, speaking & writing
•
Basic knowledge of Safety & Environment (LOTO, permit system,
lifting, rigging, scaffolding, fire protection, hydrocarbon management,
etc)
• Understand well with API, ANSI, ASTM, ASME, Civil standard
• Understand well with other design and construction of process facilities modification, upgrade, or new design
• Understand with safety and potential hazard on working location
• Skillful, competent and high motivated
• Placement : West Java
9. Instrument Engineer (CP-A69)
Qualification:
• S1 degree in Electrical / Physic Engineering.
• Capable to design instrumentation and protection system for process equipment or system.
• Advance understanding of PFD and P&ID.
• Applied knowledge of PLC, MMI, and DCS.
• Advance knowledge of instrument device and system (flow, pressure,
level, temperature, current, voltage sensor and control valve).
• 2 years in design, selection, and installation system for process equitment/plant.
• Applied project management knowledge.
• Ms. Office, Ms. Project, Fluent in English, both written and spoken.
• ADVANTAGES :
• Basic knowledge of safety & environment
(LOTO, permit system, lifting, rigging, scaffolding, fire protection,
hydrocarbon management, etc).
• 2 years in leading an instrument work project.
• 2 years in designing a control logic and MMI for process control.
• Familiar with ISA, API, ANSI, NEMA, IEEE, and other international Electrical and Instrumentation Engineering Standard .
10. Safety Engineer & coordinator (CP-A70)
Qualification:
• S1 IN Engineering or Health or Environment.
• Advance knowledge in construction risk analysis.
• Applied knowledge of chemical and hydrocarbon handling and waste management.
• Applied knowledge of fire fighting and fire protection system.
• Advance knowledge of work permit system, LOTO, JSA, Hazart Analysis.
• Advance knowledge in Root Cause Analysis and Accident Investigation.
• Basic knowledge in fabrication method, installation and construction
method/strategy, lifting, earth moving, and civil construction method.
• Hold any safety training certificates.
• 5 years experience as safety engineer.
• Ms. Office, Fluent in English, both written and spoken.
• ADVANTAGES :
• Hold K3 certificate.
• Familiar with kepmen 555, OSHA, NOSA, or other international safety standards.
• Experience in piping and structural steel fabrication and construction.
Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.
|
|
|
About the Author
